BRK 7010BSLA - 120V AC Wire-in with 3 Volt 2 AA Battery Backup - Photoelectric Sensor - Smoke Alarm with Strobe Light for the Hearing Impaired

Smoke Alarm with Stroble Light for the hearing impaired

• Integrated Photoelectric Smoke Alarm and Strobe Light
  One device includes both a photoelectric smoke alarm and a strobe light. Requires only one electrical box. Saves installation time.

• Smart Strobe
  Works with BRK smoke, heat and CO alarms. Separate flash patterns to distinguish between smoke/heat or CO danger.

• 177 Candela Xenon Light
  Powerful 177 candela xenon strobe light provides effective visual warning to awaken hearing impaired residents.

• 1Hz Flash Rate
  60 flashes per minute meets ADA, ANSI 117.1, NFPA 72 and UL 1971 requirements for visual signaling devices.

• Battery Backup
  Two AAA batteries provide backup for the smoke alarm during power outages. (Note: will not power the strobe light)

• Meets ADA Requirements
  Meets the requirements of the Americans with Disabilities Act (ADA)

• Two Latching Features
  Alarm Latch - Visually identifies initiating alarm even after alarm condition is over. Low Battery Latch - Visually identifies which unit is in low battery condition.

• Two Silence Features
  Temporarily silence low battery chirp for up to eight hours before replacing battery or silence an unwanted alarm for several minutes.

DID YOU KNOW?

Ionization Smoke Alarms - Generally are more effective at detecting flaming fires, which consume combustibles quickly and spread rapidly. Sources of these fires include paper burning in a wastebasket, or grease fires on a stove. 

Photoelectric Smoke Alarms – Generally are more effective at detecting smoldering fires, which smolder for hours before bursting into flame. Sources of the fires include cigarette smoldering in couches or bedding. For maximum protection, install both types of smoke alarms on every level of the home.