Additional Information
Stock Code | ATL900 |
---|---|
Brand | Lovato |
UPC | 8013975215173 |
Voltage (V) | 12/24/48VDC |
UL Listed | EAC , cULus , RCM |
Notes | HS Code: 85389091 |
General characteristics
The automatic transfer switch controller ATL 900 is used for the automatic or manual switching of the load between three lines in accordance with the selected switching logic. It has outputs for the “automatic” and/or “manual” control of contactors or motorised circuit breakers and switches. It can also manage two more control devices as tie breakers or non-priority load management. It has four current inputs for managing switching with power thresholds. The layout and system status are displayed directly on the graphic LCD.
The main features are:
– AC and DC supply inputs
– Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines
– 4 current measurement inputs
– 128x112 backlit graphic LCD to view measurements, events and alarms in 8 languages (English, Italian, French, Spanish, German, Portuguese, Polish and Russian)
– Active operating mode indicator LED
– Viewing of L-L and L-N voltage values of the controlled lines
– Viewing the status of contactors or motorised circuit breakers both via display and LED
– 6 system layouts available
– Management of a tie breaker
– 12 programmable digital inputs
– 10 programmable relay outputs
– 1 static output
– Viewing of L-L and L-N voltage values of the controlled lines
– Configuration programming of lines, type of source (line/generator), control and supervision parameters for emergency demand of generating set
– Possibility of transferring load with closed transition and spontaneous or controlled genset synchronisation
– Non-priority load management
– Built-in programmable PLC logic
– Built-in RS485 communication
– Event logging
– Virtual calendar clock (RTC)
– Communication interface by front optical port usingUSB CX01 or Wi-Fi CX02 dongle
– Parameter programming via NFC technology and the App NFC
– Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Android/iOS
– Modbus-RTU ASCII and TCP communication protocol.
CONTROL FUNCTIONS OF THE LINES
– Phase sequence and phase loss
– Minimum and maximum voltage
– Voltage asymmetry
– Minimum and maximum frequency.
Operational characteristics
– Power supply
• Power supply voltage: 100...240VAC; 12/24/48VDC
– Voltage measurement inputs
• Rated voltage Ue: 100...600VAC (L-L)
• Frequency range: 45...65Hz.
– Programmable digital inputs
• Negative inputs
– Programmable relay outputs
• 3 each with 1 normally open contact (NO - SPST) rated 12A 250VAC
• 3 each with 1 normally open contact (NO - SPST) rated 8A 250VAC
• 4 each with 1 changeover contact (NO/NC - SPDT) 8A 250VAC
• 1 30VDC 50mA static output
– Enclosure
• Flush-mount housing: 180x240mm/5.7x5.7”
• IEC degree of protection: IP65 on front; IP20 at back.
Synergy,Xpress,Sam1 and NFC software and APP
See section 27
EXP expansion modules See page 28-2.
Certifications and compliance
Certifications obtained: cULus, EAC, RCM.
Compliant with standards: IEC/EN 61010-1, IEC/EN 61010-2, IEC/EN 61000-6-2, IEC/EN 61000-6-4, IEC/EN 60947-1, IEC/EN 60947-6-1, UL508 and CSA C22.2 n° 14.
$1,246.57
|
$1,298.86
|
$8,409.27
|
$1,580.19
|
$1,409.72
|
$1,324.38
|
$2,185.90
|
Lovato RGK800RDSA - REMOTE ANNUNCIATOR - GRAPHIC LCD - TOUCH SCREEN 128X112 PIXELS - IP54 PROTECTION
$2,583.58
|