Ballast / Transformer

Magnetic Ballasts for PL-13W GX23 lamp type, 1 lamp(s) at 1 x 13W watts

* This magnetic ballast has been discontinued. *

Constant Voltage Design, 100-240VAC 0.35A 50/60Hz Input, 12VDC 1.0A Output, IP30 for Indoor LED Lighting, Class 2 LED Power Supply, Suitable for use in Dry and Damp Locations.

The LED-HWB12-WH is a 12 watt hardwire box for use with 12V DC LED puck lights, LED strip and tape for undercabinet and cove lighting requirements. The LED-HWB12-WH meets code for field hardwire installation.

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, Class 2, ETL Listed, Certified to CSA Standard

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, Class 2, ETL Listed, Certified to CSA Standard

Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch, Super compact ALUMINUM CASE, Class 2, IP67 – Withstands wet and salty conditions.

Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch, Super compact ALUMINUM CASE, Class 2, IP67 – Withstands wet and salty conditions.

The HWB-DIM-MDC-24V-20W is a compact magnetic driver equipped with two auto-reset breakers which protect both the load and the driver. All encased in a coated metal box that includes 2 knockouts to enable easy installation.

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, Class 2, ETL Listed, Certified to CSA Standard

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, Class 2, ETL Listed, Certified to CSA Standard

The LED-TP10-BK is a 12 watt in-line driver for use with LED puck lights, LED strip and tape for undercabinet and cove lighting requirements.

White LED driver - runs up to 5 LED pucks from an in-line transformer (12W max.) by a wiring hub and/or with daisy chain

LED-DVR-DIM-12V-20W is a Class 2, constant voltage, 12V, 20W max. dimmable LED driver with power cord and a wiring hub; for use with 12V LED lighting products. Suitable for indoor use only.

20W Single Output Switching Power Supply. Output Voltage 9V - 30V, Output Current 700mA, Class 2, Universal input voltage 100 – 240Vac, Side Lead Exit, Constant Current LED Driver

Output Voltage 5V - 17V, Output Current 700mA, Max Output Power 12Watt, Class 2 Output, Input Voltage 120 Vac, Trac Dimmable (Forward Phase Control), Side Lead Exit, Constant Current LED Driver, Dry & Damp Location Rated, Short Circuit and Open Circuit Protected