Constant Current LED Driver (50W - 99W)

Max. Output Power: 54W, Input Voltage: 347, Output Current: 0.1 - 1.5A, Output Voltage: 27 - 54V, Power Factor @Max Load: >0.96, Dimming: 0-10V Analog Class 1 or Class 2 Wiring, Envir.Protection Rating: UL damp & dry

50W Linear Programmable LED driver for 347V input voltage. Dimmable with 0-10V to 10%. Output Current Pre-set to 1050mA.

Everline D15CC55347TZ-C, Output 13V - 37V, 15mA - 1500mA, Max Output Power 55Watt, 0 to 10 vDC Voltage Control with Tuning Interface, Class 2 Output, Universal input voltage 347 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Everline D10CC55347TW-C, Output Voltage 19V - 53V, Output Current 11mA - 1050mA, Max Output Power 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, 347Vac, Wire Trap / Plug‐in Connectors for 18 AWG Solid Wire, Constant Current LED Driver. 

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Everline D10CC55347TW-K/KS, Output Voltage 19V - 53V, Output Current 11mA - 1050mA, Max Output Power 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, 347Vac, Wire Trap / Plug‐in Connectors for 18 AWG Solid Wire, Constant Current LED Driver. 

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

347V AC Input Voltage - Short Circuit & Overload Protection - 50 / 60Hz Input Frequency - Constant Current Output Mode - 176°F / 80°C Max. Case Temperature - 80W - 1.0-2.2A - 28-36V DC

347V AC Input Voltage - Short Circuit & Overload Protection - 50 / 60Hz Input Frequency - Constant Current Output Mode - 176°F / 80°C Max. Case Temperature - 80W - 1.0-2.2A - 37V DC

347V AC Input Voltage - Short Circuit & Overload Protection - 50 / 60Hz Input Frequency - Constant Current Output Mode - 176°F / 80°C Max. Case Temperature - 54W - 1.0-1.5A - 37V DC