Electrical

The IOS-HB-U Occupancy sensor incorporates passive infrared technology to detect occupancy and ambient light levels in a specific area. When occupancy is detected, the lighting or device will automatically turn ON. When the presence is no longer detected and the adjustable time delay expires, the lighting or device automatically turns OFF. The Occupancy sensor also features an Ambient light sensor that keeps lighting or device from turning on whenever the ambient light level meets or exceeds the user-adjusted level.

The IOS-CMP-U Occupancy sensor incorporates passive infrared technology to detect occupancy and ambient light levels in a specific area. When occupancy is detected, the lighting or device will automatically turn ON. When the presence is no longer detected and the adjustable time delay expires, the lighting or other device automatically turns OFF. The Occupancy sensor also features an Ambient light sensor that keeps lighting or device from turning on whenever the ambient light level meets or exceeds the user-adjusted level.

The Intermatic PC2120LS1 is a twochannel light controller with a single channel switch and an LS1 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC1120 is a onechannel light controller with a single channel switch from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC2-120 is a twochannel light controller with a single channel switch from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC1120LS1 is a onechannel light controller with a single channel switch and an LS1 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC2120LS2 is a twochannel light controller with a single channel switch and an LS2 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC1120LS2 is a onechannel light controller with a single channel switch and an LS2 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

120 Volt 10 Amp, 2 Pole, 3 Wire, In-Line Protector Surge Protective Device, Wired-In Module, DIN-Rail Mounted in a NEMA 1 Enclosure

120 Volt 10 Amp, 2 Pole, 3 Wire, In-Line Protector Surge Protective Device, Wired-In Module, Surface Mounted in a NEMA 1 Enclosure

Provide transparent sensors for all lighting applications One sensor provide a signal for up to ten LightMaster control modules Accurate, reliable measurement for precise foot-candle light level settings

2 channel control unit 1 light level set point per channel Available in UL Type 3R Rain tight, outdoor enclosure Adjustable dial for setting foot candle levels 0 to 100 second delay adjustment to avoid nuisance switching from clouds, headlamps, or lightning Up to 10 control units (20 Channels) can be connected to one sensor Light level sensor can be mounted up to 330 feet away from control unit Sensors are non-arcing low voltage

Provide opaque sensors for all lighting applications One sensor provide a signal for up to ten LightMaster control modules Accurate, reliable measurement for precise foot-candle light level settings