Decora Digital / Decora Smart

Decora Smart Fan Speed Controller, single pole, 3-way, or multilocation when used with Wired Switch or Dimmer Companions or Wire-Free Anywhere Dimmer or Switch Companions. For use with overhead ceiling paddle fans not to exceed 1.5A maximum load, neutral wire required – White.

Decora Smart No-Neutral Switch, single pole, 3-way, or multi-location when used with the DAWSC Wire-Free Anywhere Switch Companion. 15 Amp General Use, 5A LED/CFL/Electronic Ballast, 1500W Incandescent/Halogen, 15 Amp Magnetic Ballast, ¾ HP Motor, White.

Decora Rocker-Slide 1200VA-277VAC Fluorescent Dimmer for Mark 10 Ballasts, 60Hz, Single Pole or 3-Way - White, Ivory & Light Almond

Decora Rocker-Slide 6A-277VAC Fluorescent Dimmer for Hi-Lume or Eco-10 (Eco-Series) Ballasts, 60Hz, Neutral required, Single Pole or 3-Way - White, Ivory & Light Almond

The DG15S provides On and Off of connected lighting via the manual Decora rocker switch or can be controlled wirelessly as part of a Zigbee network. The DG15S is also compatible with a wide variety of load types such as Incandescent, LED/CFL, and Fluorescent. The DG15S is built for performance with a 15A relay and is also rated for ½ HP motor loads.

With the DG6HD, dim and brighten lights from 0-100% or turn lights on and off via the manual Decora rocker switch and dim/bright bar. The DG6HD can also be controlled wirelessly as part of a Zigbee network. The DG6HD is compatible with Incandescent and LED / CFL lighting loads.

With the DG3HL, dim and brighten table and floor lamps from 0-100% or turn lights on and off wirelessly as part of a Zigbee network. The DG3HL is compatible with incandescent and LED / CFL lighting loads. When paired with a Zigbee compatible hub, gateway, or controller, the DG3HL dimmer provides remote lighting control from anywhere and can be included in scene-based lighting, schedules, and other smart home activities – such as automating your plug-in lamps and holiday lighting without any new wiring – simply plug-in the device and pair to a compatible Zigbee hub, gateway, or controller.

Decora Digital Switch and 24 hour Timer 1800W Incandescent (120V), 15A Fluorescent (120V), 6A Fluorescent (277V), 5A 600W LED/CFL (120V), 15A Resistive (120V), 1/2 HP Motor (120V), Single Pole and 3-way/multi-location control with LED locator. White face assembled on device, Ivory and Light Almond faces included. Neutral wire required

Decora Digital Dimmer, 300W-120VAC dimmable LED/CFL 600W-120VAC incandescent/halogen and 600VA magnetic low voltage, neutral wire required, 60Hz, single pole or 3-way control when used with Decora Digital Remote - White, Ivory & Light Almond

Decora Digital Dimmer and 24 hour Timer with Bluetooth Technology. 300W Dimmable LED and CFL, 600W Incandescent, 120V, 60Hz, Single Pole and 3-Way/Multi-location control, LED locator and brightness display. White face assembled on device, Ivory and Light Almond faces included. Ground wire required for installation. Wallplate sold separately.

Decora Digital Universal Dimmable LED, CFL and Incandescent Digital Dimmer, 300W Dimmable LED and CFL, 600W Incandescent 120V, 60Hz, Single Pole and 3- Way/Multi-location control, LED locator and brightness display. White face assembled on device, Ivory and Light Almond faces included. Ground wire required for installation. Wallplate sold separately.

A powerful device combining the best of Leviton fan speed control and timer functions with today’s technology. Just use your smartphone or tablet and the Decora Digital Dimmer & Timer app to control, adjust and time ceiling fans for daily activities or to enhance comfort levels. Decora Digital Controls with Bluetooth technology provide local control within a 30 foot* range without the need of a hub, gateway or internet connection, bridging the gap between traditional dimmers and whole-house automation systems.

Decora Smart No-Neutral Dimmer, single pole, 3-way, or multi-location when used with the DAWDC Wire-Free Anywhere Dimmer Companion or DAWSC Wire-Free Anywhere Switch Companion. 300W LED/CFL, 600W Incandescent/Halogen, 600VA Magnetic Low Voltage, White.

Decora Smart Wi-Fi® 2nd Generation devices connect to a Wi-Fi network and the My Leviton app to provide wireless lighting control for the whole home. Leviton’s Wi-Fi 2nd Generation Dimmer makes it easier than ever to add smart lighting control possibilities to any room or home.

Decora Smart Wi-Fi (2nd Gen) Motion Sensing Dimmer, 180° PIR field-of-view, up to 900 sq. ft. of motion coverage, supports both occupancy and vacancy modes of operation, single pole or 3-way when used with Wired Switch or Dimmer Companion or Wire-Free Anywhere Dimmer or Switch Companion. 300W LED/CFL, 450W Incandescent/Halogen, 450VA Magnetic Low Voltage, neutral wire required, White

Decora Smart Wi-Fi Bridge is a small, discreet plug-in that is required to enable smart features for Decora Smart No-Neutral devices. Works with Wi-Fi 802.11 b/g/n networks @ 2.4GHz only, White.

The Leviton DZPD3 is a Z-Wave Plus enabled plug-in dimmer, ideal for any residential setting that needs remote dimming of table and floor lamps up to 300W, including Incandescent, LED, Incandescent and Compact Fluorescent loads. Attach one or multiple DZPD3 devices to these controllers to provide automation and remote access. The button on the front of the DZPD3 is utilized for including/excluding the device in a Z-Wave network as well as manual on/off control of the connected device.

In addition to universal lighting support, the DZ6HD features two-way feedback, is scene capable, and is Z-Wave Plus certified, ensuring the latest technology, increased communication range, network wide inclusion, and over the air updates. Includes 49 different fade rates and features user pre-sets for powering on and minimum brightness. Also features transient surge suppression built-in. Can be used in 3-way, multi-way circuit by using matching DD00R-DL remote dimmer.

The Leviton DZ15S is a Z-Wave Plus enabled universal switch designed for residential lighting applications. It uses the latest generation of Leviton’s technology for smart lighting control, engineered to function with extremely sensitive, low-wattage light sources, such as a single LED bulb in a hallway or a strand of holiday lights, ensuring LEDs do not glow when off.