Decora Digital / Decora Smart

Lutron MA-L3T251-WH - Maestro Single Pole Dual Digital Fade Dimmer/Countdown Timer Control Switch - 120 V 300 W Dimmer (Top) Incandescent/Halogen - 2.5 A Light/Fan Timer Switch (Bottom) - White

Lutron RRD-6CL-WH - RadioRA 2 - 120V C•L dimmer. Max ratings are 150W LED - 600W incandescent/halogen or 450W MLV - White

* This model has been replaced by its upgraded version - RRD-PRO-WH, please refer to the following LINK for more details

https://www.lutron.com/en-US/general/Pages/Promos/maestroled.aspx

Lutron MA-L3S25-WH - Maestro Single Pole Dual Dimmer/Electronic Switch - 120 V 300 W Dimmer (Top) Incandescent/Halogen - 2.5 A Light/Fan Switch (Bottom) - White

Lutron MA-L3T251HW-WH-C - Maestro Single Pole Dual Digital Fade Dimmer/Countdown Timer Control Switch With Wallplate - 120 V 300 W Dimmer (Top) Incandescent/Halogen - 2.5 A Light/Fan Timer Switch (Bottom) - White

Decora Smart Fan Speed Controller, single pole, 3-way, or multilocation when used with Wired Switch or Dimmer Companions or Wire-Free Anywhere Dimmer or Switch Companions. For use with overhead ceiling paddle fans not to exceed 1.5A maximum load, neutral wire required – White.

Decora Smart No-Neutral Switch, single pole, 3-way, or multi-location when used with the DAWSC Wire-Free Anywhere Switch Companion. 15 Amp General Use, 5A LED/CFL/Electronic Ballast, 1500W Incandescent/Halogen, 15 Amp Magnetic Ballast, ¾ HP Motor, White.

The DG15S provides On and Off of connected lighting via the manual Decora rocker switch or can be controlled wirelessly as part of a Zigbee network. The DG15S is also compatible with a wide variety of load types such as Incandescent, LED/CFL, and Fluorescent. The DG15S is built for performance with a 15A relay and is also rated for ½ HP motor loads.

With the DG6HD, dim and brighten lights from 0-100% or turn lights on and off via the manual Decora rocker switch and dim/bright bar. The DG6HD can also be controlled wirelessly as part of a Zigbee network. The DG6HD is compatible with Incandescent and LED / CFL lighting loads.

With the DG3HL, dim and brighten table and floor lamps from 0-100% or turn lights on and off wirelessly as part of a Zigbee network. The DG3HL is compatible with incandescent and LED / CFL lighting loads. When paired with a Zigbee compatible hub, gateway, or controller, the DG3HL dimmer provides remote lighting control from anywhere and can be included in scene-based lighting, schedules, and other smart home activities – such as automating your plug-in lamps and holiday lighting without any new wiring – simply plug-in the device and pair to a compatible Zigbee hub, gateway, or controller.

Decora Smart No-Neutral Dimmer, single pole, 3-way, or multi-location when used with the DAWDC Wire-Free Anywhere Dimmer Companion or DAWSC Wire-Free Anywhere Switch Companion. 300W LED/CFL, 600W Incandescent/Halogen, 600VA Magnetic Low Voltage, White.

Decora Smart Wi-Fi® 2nd Generation devices connect to a Wi-Fi network and the My Leviton app to provide wireless lighting control for the whole home. Leviton’s Wi-Fi 2nd Generation Dimmer makes it easier than ever to add smart lighting control possibilities to any room or home.

Decora Smart Wi-Fi (2nd Gen) Motion Sensing Dimmer, 180° PIR field-of-view, up to 900 sq. ft. of motion coverage, supports both occupancy and vacancy modes of operation, single pole or 3-way when used with Wired Switch or Dimmer Companion or Wire-Free Anywhere Dimmer or Switch Companion. 300W LED/CFL, 450W Incandescent/Halogen, 450VA Magnetic Low Voltage, neutral wire required, White

Decora Smart Wi-Fi Bridge is a small, discreet plug-in that is required to enable smart features for Decora Smart No-Neutral devices. Works with Wi-Fi 802.11 b/g/n networks @ 2.4GHz only, White.

The Leviton DZPD3 is a Z-Wave Plus enabled plug-in dimmer, ideal for any residential setting that needs remote dimming of table and floor lamps up to 300W, including Incandescent, LED, Incandescent and Compact Fluorescent loads. Attach one or multiple DZPD3 devices to these controllers to provide automation and remote access. The button on the front of the DZPD3 is utilized for including/excluding the device in a Z-Wave network as well as manual on/off control of the connected device.

In addition to universal lighting support, the DZ6HD features two-way feedback, is scene capable, and is Z-Wave Plus certified, ensuring the latest technology, increased communication range, network wide inclusion, and over the air updates. Includes 49 different fade rates and features user pre-sets for powering on and minimum brightness. Also features transient surge suppression built-in. Can be used in 3-way, multi-way circuit by using matching DD00R-DL remote dimmer.

The Leviton DZ15S is a Z-Wave Plus enabled universal switch designed for residential lighting applications. It uses the latest generation of Leviton’s technology for smart lighting control, engineered to function with extremely sensitive, low-wattage light sources, such as a single LED bulb in a hallway or a strand of holiday lights, ensuring LEDs do not glow when off.

The Decora Smart™ Voice Dimmer with Amazon Alexa Built-in combines easy Wi-Fi lighting with the convenience of the Amazon Alexa voice assistant in a single, sleek device built into your home.

The Decora Smart® Anywhere Switch Companion pairs wirelessly with your Decora Smart Wi-Fi® 2nd Generation devices to provide additional ON/OFF lighting control locations wherever you need it most such as at the base of a staircase, the end of a hallway or open areas with multiple entrances like a large kitchen or family room. Mount it directly on the wall surface or at an existing single or multi-gang wallbox – no wiring is required.

The Decora Smart® Anywhere Dimmer Companion pairs wirelessly with your Decora Smart Wi-Fi® 2nd Generation Dimmer (D26HD) or Mini Plug-In Dimmer (D23LP) to provide additional lighting control wherever you need it most such as at the base of a staircase, the end of a hallway or open areas with multiple entrances like a large kitchen or family room. Mount it directly on the wall surface or at an existing single or multi-gang wallbox — no wiring is required.