Decora Digital / Decora Smart

Decora Smart Fan Speed Controller, single pole, 3-way, or multilocation when used with Wired Switch or Dimmer Companions or Wire-Free Anywhere Dimmer or Switch Companions. For use with overhead ceiling paddle fans not to exceed 1.5A maximum load, neutral wire required – White.

Decora Smart No-Neutral Switch, single pole, 3-way, or multi-location when used with the DAWSC Wire-Free Anywhere Switch Companion. 15 Amp General Use, 5A LED/CFL/Electronic Ballast, 1500W Incandescent/Halogen, 15 Amp Magnetic Ballast, ¾ HP Motor, White.

The DG15S provides On and Off of connected lighting via the manual Decora rocker switch or can be controlled wirelessly as part of a Zigbee network. The DG15S is also compatible with a wide variety of load types such as Incandescent, LED/CFL, and Fluorescent. The DG15S is built for performance with a 15A relay and is also rated for ½ HP motor loads.

With the DG3HL, dim and brighten table and floor lamps from 0-100% or turn lights on and off wirelessly as part of a Zigbee network. The DG3HL is compatible with incandescent and LED / CFL lighting loads. When paired with a Zigbee compatible hub, gateway, or controller, the DG3HL dimmer provides remote lighting control from anywhere and can be included in scene-based lighting, schedules, and other smart home activities – such as automating your plug-in lamps and holiday lighting without any new wiring – simply plug-in the device and pair to a compatible Zigbee hub, gateway, or controller.

Decora Digital Switch and 24 hour Timer 1800W Incandescent (120V), 15A Fluorescent (120V), 6A Fluorescent (277V), 5A 600W LED/CFL (120V), 15A Resistive (120V), 1/2 HP Motor (120V), Single Pole and 3-way/multi-location control with LED locator. White face assembled on device, Ivory and Light Almond faces included. Neutral wire required

Decora Digital Dimmer, 300W-120VAC dimmable LED/CFL 600W-120VAC incandescent/halogen and 600VA magnetic low voltage, neutral wire required, 60Hz, single pole or 3-way control when used with Decora Digital Remote - White, Ivory & Light Almond

Decora Digital Dimmer and 24 hour Timer with Bluetooth Technology. 300W Dimmable LED and CFL, 600W Incandescent, 120V, 60Hz, Single Pole and 3-Way/Multi-location control, LED locator and brightness display. White face assembled on device, Ivory and Light Almond faces included. Ground wire required for installation. Wallplate sold separately.

Decora Digital Universal Dimmable LED, CFL and Incandescent Digital Dimmer, 300W Dimmable LED and CFL, 600W Incandescent 120V, 60Hz, Single Pole and 3- Way/Multi-location control, LED locator and brightness display. White face assembled on device, Ivory and Light Almond faces included. Ground wire required for installation. Wallplate sold separately.

A powerful device combining the best of Leviton fan speed control and timer functions with today’s technology. Just use your smartphone or tablet and the Decora Digital Dimmer & Timer app to control, adjust and time ceiling fans for daily activities or to enhance comfort levels. Decora Digital Controls with Bluetooth technology provide local control within a 30 foot* range without the need of a hub, gateway or internet connection, bridging the gap between traditional dimmers and whole-house automation systems.

Decora Smart Wi-Fi® 2nd Generation devices connect to a Wi-Fi network and the My Leviton app to provide wireless lighting control for the whole home. Leviton’s Wi-Fi 2nd Generation Dimmer makes it easier than ever to add smart lighting control possibilities to any room or home.

Decora Smart Wi-Fi Bridge is a small, discreet plug-in that is required to enable smart features for Decora Smart No-Neutral devices. Works with Wi-Fi 802.11 b/g/n networks @ 2.4GHz only, White.

The Leviton DZPD3 is a Z-Wave Plus enabled plug-in dimmer, ideal for any residential setting that needs remote dimming of table and floor lamps up to 300W, including Incandescent, LED, Incandescent and Compact Fluorescent loads. Attach one or multiple DZPD3 devices to these controllers to provide automation and remote access. The button on the front of the DZPD3 is utilized for including/excluding the device in a Z-Wave network as well as manual on/off control of the connected device.

In addition to universal lighting support, the DZ6HD features two-way feedback, is scene capable, and is Z-Wave Plus certified, ensuring the latest technology, increased communication range, network wide inclusion, and over the air updates. Includes 49 different fade rates and features user pre-sets for powering on and minimum brightness. Also features transient surge suppression built-in. Can be used in 3-way, multi-way circuit by using matching DD00R-DL remote dimmer.

The Leviton DZ15S is a Z-Wave Plus enabled universal switch designed for residential lighting applications. It uses the latest generation of Leviton’s technology for smart lighting control, engineered to function with extremely sensitive, low-wattage light sources, such as a single LED bulb in a hallway or a strand of holiday lights, ensuring LEDs do not glow when off.

The Decora Smart® Anywhere Switch Companion pairs wirelessly with your Decora Smart Wi-Fi® 2nd Generation devices to provide additional ON/OFF lighting control locations wherever you need it most such as at the base of a staircase, the end of a hallway or open areas with multiple entrances like a large kitchen or family room. Mount it directly on the wall surface or at an existing single or multi-gang wallbox – no wiring is required.

The Decora Smart® Anywhere Dimmer Companion pairs wirelessly with your Decora Smart Wi-Fi® 2nd Generation Dimmer (D26HD) or Mini Plug-In Dimmer (D23LP) to provide additional lighting control wherever you need it most such as at the base of a staircase, the end of a hallway or open areas with multiple entrances like a large kitchen or family room. Mount it directly on the wall surface or at an existing single or multi-gang wallbox — no wiring is required.

The 2nd Generation mini plug-in design allows for two mini plug-ins to be plugged into a single outlet – ideal for controlling multiple devices in areas like living rooms, bedrooms, and kitchens. As well, the integrated button provides manual ON/OFF control at any time.

The 2nd Generation mini plug-in design allows for two mini plug-ins to be plugged into a single receptacle – ideal for controlling multiple devices in areas like living rooms, bedrooms, and kitchens. As well, the integrated button provides manual ON/OFF control at any time.

The Wi-Fi 2nd Gen Switch features wire leads, reduced product depth, and a streamlined app setup flow for easier installation. The switch features a rocker switch with intuitive ON/OFF control.