Non Metallic Weatherproof Covers

The Intermatic WP1000HC is a singlegang, weatherproof receptacle cover. This horizontal cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This clear receptacle cover is ideal for schools and commercial buildings. It is intended to be used for horizontal outdoor outlets which are situated in a wet location. This clear cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 2 1/4".

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Gray - Complies with 2008 NEC Article 406.8(B) - Patented inserts offer more configurations and cover more jobs - Heavy-duty polycarbonate construction - Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

The WP1000WC Plastic In-Use Covers are easy to install and shipped with gasket, mounting screws, base cover assembly and patented inserts for serve applications, such as schools and commercial buildings.

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Clear;Complies with 2008 NEC Article 406.8(B);Patented inserts offer more configurations and cover more jobs;Heavy-duty polycarbonate construction;Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

Intermatic WP1020GC - Plastic in Use Cover - 2 Gang or Single Gang 2-1/4" w/ 1 Gang Duplex and GFCI Inserts - Gray

Plastic In-Use Cover - 2 Gang or Single Gang 2-1/4" w/ 1 Gang Duplex and GFCI Inserts - White

Plastic In-Use Cover - 2 Gang or 1 Gang 3-1/8" Deep w/ 1 Gang Duplex and GFCI Inserts - Clear

This WP1010HMXD (AKA Slim) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

This WP1010MXD (AKA Boss) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Gray - Complies with 2008 NEC Article 406.8(B) - Patented inserts offer more configurations and cover more jobs - Heavy-duty polycarbonate construction - Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

This WP3110MXD (AKA Slim) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Plastic In-Use Weatherproof Covers are easy to install and include a gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications.

Plastic In-Use Weatherproof Covers are easy to install and include a gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications.

Plastic In-Use Weatherproof Covers are easy to install and include a gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications.

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)