Photo Controls

Easy to install; just plug and twist. Translucent with color coded band for voltage identification. This model equipped with 2400 volt open type spark gap arrester.

Specifically designed to provide long life and superior surge protection when used with LED fixtures, Max. limits 105-305 VAC, 370 Joule MOV, Turn ON >= 1.5 foot candles,  Turn OF 2.25 +/- .2 fc,  2-5 second delay, 8-year manufacturer’s warranty.

Provide dusk-to-dawn lighting control - Thermal Type eliminates loads switching OFF due to car headlights and lightning - 1800 Watts Tungsten - 1000 VA Ballast - 15 Amps Tungsten and 8.3 Amps Ballast

The EK4136S is an electronic photo control that fits standard ½" knockouts in standard outlet boxes and wall pack lighting fixtures. It is made with a UV stabilized, high impact plastic housing that stands up to outdoor environment and features a silicon light sensor with a zero-crossing circuit to provide a long service life.

Delay action eliminates load switching off due to car headlights and lightning - 6-inch leads - Light level slide adjustment - Includes washer gasket and locking nut

All models equipped with a light level slide adjustment and provides a 1/2 in. - 14 threaded stem. Washer gasket and locking nut are packaged with each photo control.

Delay action eliminates load switching off due to car headlights and lightning - 6-Inch leads - Light level slide adjustment - Includes washer gasket and locking nut

All models equipped with a light level slide adjustment and provides a 1/2 in. - 14 threaded stem. Washer gasket and locking nut are packaged with each photo control.

K4200 Series - 1/2 in. - 14 threaded swivel, 1 9/16 in. (4.0 cm) Square, 5 1/2 in. (14.0 cm) Long

The EK4236S and EK4736S are electronic photo controls that come with a swivel arm for easy reorientation of the photo control after installation. They fit standard ½" knockouts in standard outlet boxes and wall pack lighting fixtures. 

Provide dusk-to-dawn lighting control - Thermal Type eliminates loads switching OFF due to car headlights and lightning - 3100-4150 Watts Tungsten - 1700-2300 VA Ballast - 5 Amps Tungsten and 8.3 Amps Ballast

The EK4236S and EK4736S are electronic photo controls that come with a swivel arm for easy reorientation of the photo control after installation. They fit standard ½" knockouts in standard outlet boxes and wall pack lighting fixtures. 

The EK4036S is an electronic photo control that fits in a standard outlet box, post lamp or light fixture. It is made within dimensional guidelines in ANSI C136-24 to assure fit within a large variety of fixtures and features a silicon light sensor with zero-crossing circuit to provide a long service life.