Wire Mesh Safety Grips

Support Grip - Bus Drop Safety Spring 40Lb Max. Load - Zinc Plated

Single U Eye, Closed Mesh, Single Weave, Bus-Drop Duty, Support Wire Mesh Grip .220 - .320 Cable Dia.Range, Length

Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications
Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged
Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables

Reusable Pulling Head
• No Need To Strip The Wire
• Low Profile Head Eliminates The Problem of The Head Not Fitting In The Conduit or
Around a Tight Turn
• Easily Attach and Remove Up To 7 Wires Without Cutting
• Saves Time Making Pulling Heads
• Industrial Gripit Device’s May Be Used With Circuit Sized Wires 14AWG and Up.

Reusable Pulling Head
• No Need To Strip The Wire
• Low Profile Head Eliminates The Problem of The Head Not Fitting In The Conduit or
Around a Tight Turn
• Easily Attach and Remove Up To 7 Wires Without Cutting
• Saves Time Making Pulling Heads
• Industrial Gripit Device’s May Be Used With Circuit Sized Wires 14AWG and Up.

Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications

Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged

Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables

Single U Eye, Closed Mesh, Single Weave, Bus-Drop Duty, Support Wire Mesh Grip .300 - .430 Cable Dia.Range, Length

- Diameter Range: 0.19" - 0.24"
- Flexible/low-profile
- Reusable/durable
- Galvanized for Corrosion/weather Resistance
- Saves Time Making Pulling Heads

Reusable Pulling Head
• No Need To Strip The Wire
• Low Profile Head Eliminates The Problem of The Head Not Fitting In The Conduit or
Around a Tight Turn
• Easily Attach and Remove Up To 7 Wires Without Cutting
• Saves Time Making Pulling Heads
• Industrial Gripit Device’s May Be Used With Circuit Sized Wires 14AWG and Up.

Reusable Pulling Head
• No Need To Strip The Wire
• Low Profile Head Eliminates The Problem of The Head Not Fitting In The Conduit or
Around a Tight Turn
• Easily Attach and Remove Up To 7 Wires Without Cutting
• Saves Time Making Pulling Heads
• Industrial Gripit Device’s May Be Used With Circuit Sized Wires 14AWG and Up.

Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications

Support grips distribute the weight of the vertical or sloping runs of electrical and fiber optic cable, metal rods, tubing or hose over the entire length of the grip so the cable is not damaged

Use of support grips avoids stress on cable connections and provides needed support for vertically hung cables

Single U Eye, Closed Mesh, Single Weave, Bus-Drop Duty, Support Wire Mesh Grip .410 - .560 Cable Dia.Range, Length

- Max Rated Capacity: 90 lbs.
- Diameter Range: 0.25" - 0.36"
- Flexible/low-profile
- Reusable/durable
- Galvanized for Corrosion/weather Resistance

1/2 Inch, Straight, Male, Anodized Aluminum Body, Wide-Range Strain-Relief, .220 - .320 Cord Range

Support Grip - Bus Drop Safety Spring 80Lb Max. Load - Zinc Plated

Leviton wire mesh grips are built tough to provide the strength, reliability, and gripping force required for today’s demanding wire mesh applications

Strain relief grips are used to connect cable or flexible conduit to electrical enclosures and equipment and resist pull out

These grips reduce pulling tension, flexing, twisting, and bending that can cause system damage

1/2 Inch, Straight, Male, Anodized Aluminum Body, Wide-Range Strain-Relief, .300 - .430 Cord Range

- Max Rated Capacity: 180 lbs.
- Diameter Range: 0.37" - 0.49"
- Flexible/low-profile
- Reusable/durable
- Galvanized for Corrosion/weather Resistance

Reusable Pulling Head
• No Need To Strip The Wire
• Low Profile Head Eliminates The Problem of The Head Not Fitting In The Conduit or
Around a Tight Turn
• Easily Attach and Remove Up To 7 Wires Without Cutting
• Saves Time Making Pulling Heads
• Industrial Gripit Device’s May Be Used With Circuit Sized Wires 14AWG and Up.