Light Lift

The Smart-Lift Controller is designed to operate the light lift using touch pad controls. It can be programmed to automatically stop the lift at a desired height above the floor. It automatically shuts off at the ceiling without being programmed. By removing the key, the Smart-Lift Controller becomes child resistant and prevents accidental activation of the light lift.

How to install it and How to .... Click this link and Watch the Videos Clips

The ALL300-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

300 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 35ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL700-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

700 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 35ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL1000-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

1000 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 35ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL200RM-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

200 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 65ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL300RM-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

300 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 65ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL700RM-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

700 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 65ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL1000RM-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

1000 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 65ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

Special Mount: Sloped Ceilings. Max Slopes: 1/4 IPS=30^o 3/8 IPS=23^o. Please read enclosed spec sheet for details. 

How to install it and How to .... Click this link and Watch the Videos Clips

The ALL200-CM is a ‘commercial grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

200 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 35ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

Power Supply is also available in 208V, 240V or 277V, $115 extra charge will be applied, please contact our sales department for details.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL1000RM is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

1000 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 65ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL700RM is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

700 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 65ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The Key-Switch Controller is designed to operate the light lift with the simple turning and holding of a key. By removing the key, the Key-Switch Controller becomes child resistant and prevents accidental activation of the light lift.

If you purchase any Aladdin Light Lift, this Standard Key Switch Controller is automatically included in your Light Lift Box.

How to install it and How to .... Click this link and Watch the Videos Clips

The Relamping Cord is used to temporarily relight a candelabra-base or regular medium E26 base chandelier at floor level.

After removing one bulb, thread the socket end of the six foot Relamping Cord into a socket of the chandelier. Plug other end to a 110V outlet. Press the safety switch to light the chandelier in order to determine which bulbs should be changed.

How to install it and How to .... Click this link and Watch the Videos Clips

The ALL200 is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

200 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 35ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL300 is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

300 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 35ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL700 is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

700 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 35ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL1000 is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘standard mount’ lift is designed to be installed in accessible locations, directly above the fixture.

1000 lbs Lifting Capacity, 110V 2200 Watt Power Supply, 35ft Winch Cable, Smart Lift Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips

The ALL200RM is a ‘residential grade’ motorized winch for the raising and lowering of a light fixture. This ‘remote mount’ lift is designed to be installed in an offset location when there is limited access directly above the fixture.

200 lbs Lifting Capacity, 110V 1650 Watt Power Supply, 65ft Winch Cable, Standard Key Switch Controller (50ft Long Wire) Included.

How to install it and How to .... Click here and Watch the Videos Clips