Track Accessories

The T38 Series end feed connector enables trac to be fed from above with flexible conduit, BX, or end feed in a pendant system. Accepts a standard 1/2-inch connector. Reverse polarity T38R Series end feed connector is designed for use in opposite polarity orientation compared to standard feed connectors.

Liteline CA6106-SL - Live End Conduit Feed - Silver Color - Single Circuit 2 Wire Track System

Live End conduit feed (7/8” knockout) for top or end feed. Solid 12-gauge conductors. System Electrical Rating: 20A, 120V, 60Hz.

Liteline CF6108-SL - Center Feed - Silver Color - Single Circuit 2 Wire Track System

J-Style Center Feed - provides power anywhere along the track from junction box, includes canopy cover. Solid 12-gauge conductors. System Electrical Rating: 20A, 120V, 60Hz.

The floating electrical feed permits mounting any point of trac under the outlet box. Includes floating connector, outlet box cover, and extra trac dead end.

Live End provides power from end of track (no canopy). Solid 12-gauge conductors. System Electrical Rating: 20A, 120V, 60Hz.

The conduit feed is for surface wiring using a standard 1/2-inch connector. Reverse polarity R34R conduit feed is designed for use in opposite polarity orientation compared to standard feed connectors.

The end feed connector feeds trac from above with a flexible conduit, BX, or end feed in pendant systems. Accepts a standard 1/2-inch connector. Reverse polarity R38R Series end feed connector is designed for use in opposite polarity orientation compared to standard feed connectors.

Live End provides power from end of track (no canopy). Solid 12-gauge conductor. System Electrical Rating: 20A, 120V, 60Hz.

Live End with canopy, provides power to end of track from junction box.Solid 12-gauge conductors.

Liteline LE6111-SL - Live End Power Feed With Canopy - Silver Color - Single Circuit 2 Wire Track System

The T40N Series Monopoint Adapters increase the versatility of Juno® trac fixtures by enabling them to be mounted where trac sections might not offer the best aesthetic or functional lighting solution. They mount directly to outlet boxes and accept one 120V Juno trac fixture. Available in finishes shown

Monopoint provides power to single spot light from junction box. This includes a canopy. Allows the installation of one track head without a track. Mounts permanently to outlet box.

Liteline WE6110-SL - Wired End - Single Circuit 2 Wire Track System - Silver

Wired End provides power to the end of a track from a receptacle. Solid 12-gauge conductors. Comes with a 15-ft. power cord.

Liteline IC6101-SL - I-Connector - Single Circuit 2 Wire Track System - Silver

I-Connector, connects two track sections end to end for an in-line configuration (180º).

The T24 Series adjustable connector joins 2 trac sections to make a 90-degree angle or straight run. Straight and right angle covers are supplied. Can be provided with integral ground connection. For outlet box feed, a T27 cover plate is required.