Heating & Cooling

ROTOM 92-A8099 - Mounting Hardware - Vibration dampener

ROTOM 92-P8123 - Plastic Bushings - 5/16" OD × 1/4" ID

Sleeve (H23A & B Series)

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final ! There are NO WARRANTIES ! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

Grommet (H23A & B Series)

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final ! There are NO WARRANTIES ! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

ROTOM 92-A8205 - Steel Bushings - 7/16" OD × 5/16" ID

ROTOM 92-P8121 - Plastic Bushings - 1/4" OD × 3/16" ID

Dis. Seal (094-294 Series)

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final ! There are NO WARRANTIES ! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

Skeleton Motor Mounting Adapter Kit , Converts skeleton mount to 3.3" motor diameter mount. Extends mounting bolts from 2" to 3" across

Protective Plastic End Caps , On motor end cap top side leads , 3.6cm (1 7/16")

Protective Plastic End Caps , On motor end cap leads through bracket , 3.6cm (1 7/16")

Protective Plastic End Caps , On motor end cap leads through bracket , 4.6cm (1 13/16")

Water Heater Drain Valve - Standard Grade Teflon® Tape - 1/2" × 260" roll

ROTOM 92-A8097 - Mounting Hardware - Includes screws, eyelet, speed nut and Vibration dampener

Suc. Seal (094-294 Series)

To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final ! There are NO WARRANTIES ! Compressors Should be installed by a qualified Heating Air Conditioning Tech.

Protective Plastic End Caps , On motor end cap top side leads , 4.6cm (1 13/16")

Terminal Connectors - Steel contact post

Protective Plastic End Caps , On motor end cap leads through bracket , 5.0cm (2 1/16")

All the O-rings necessary to repair any CRT, except the ones in the chuck that grab the core stem.

ROTOM 93-35431 - Plastic Fan Blades - Fixed - Hub Type - 3/16" Bore - 3.50" Diameter - CW Rotation - 4 Blades