Pool and Spa Controls

This heavy-duty Intermatic PF1222TB dual timer pool/spa freeze protection control is designed specifically for pools requiring one or two time switches and protects the pool and spa equipment and plumbing against freeze damage. The timer turns the pump and the heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat. In addition, the timer features a 4/8 breaker base and has a provision to install switches inside or a GFCI receptacle on the side of the enclosure and features heater protection.

This Intermatic PE153F two-speed pool/spa digital control couples the standard features of the compact T100 series mechanical time switches with the convenience of digital automation. One of Intermatic's latest innovations, this timer allows the ability to program up to three circuits. Beyond single and two-speed pump/booster pump applications, auxiliary modes can control pumps up to three horse power as well as underwater, garden and/or fountain lighting. The timer also features a freeze protection probe, which starts the pump when the temperature goes below freezing, preventing damage to your pool.

These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

The Intermatic PX300S 300 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX100S 100 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX600 600 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

*** Replace Obsolete model PX600S

The Intermatic PX300 300 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX100 100 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

Provides coordinated control for heater and filter pump operations - Designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down - Eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater - The 24-hour dial allows up to 12 ON/OFF operations each day - One set of ON and OFF trippers is supplied with each switch

Used in multiple applications: Filter pumps, Pool/Spa Lights, Water Features, Fountains - All plastic NEMA 3R rated for Indoor/Outdoor installation - Can be used with the Intermatic P1103FE Enclosure - 1.5 HP, 120 VAC; 3.0 HP, 240 VAC - Standard mechanism fits in all standard Intermatic time switch enclosures and swimming pool control panels

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

The P1353ME mechanism can be installed into almost any Intermatic enclosure and has the ability to program up to three circuits. Choose between seven pre-programmed modes of operation, which include single speed pump or 2-speed pump/cleaner pump combinations. In addition, programmed modes that include auxiliaries can control pumps up to 3 HP as well as underwater, landscape and/or fountain lighting. Countdown and Override features allow cycle interruptions when pool/spa service is required. All timing and protection associated with filter pump/cleaner pump combinations and two-speed pumps has already been integrated into the software.

This heavy duty Intermatic T104M 24 hour mechanical time switch mechanism is designed for industrial, commercial, and residential applications, and has the highest motor load ratings in the industry. The mechanical time switch provides up to 12 ON/OFF operations each day with a minimum ON/OFF time of one hour. It is also equipped with 'ON' and 'OFF' trippers and can be installed in almost all Intermatic enclosures.

This heavy duty Intermatic T101M 24 hour mechanical time switch mechanism is designed for industrial, commercial, and residential applications, and has the highest motor load ratings in the industry. The time switch provides up to 12 ON/OFF operations each day with a minimum ON/OFF time of one hour. It is also equipped with 'ON' and 'OFF' trippers and can be installed in almost all Intermatic enclosures.

This black Intermatic PJB4175 junction box features an innovative strain relief design, requiring only two screws to attach the lid to the base. The junction box provides a safe and reliable connection for up to four pool/spa lights and accepts multiple conduit sizes, and its primary application is in pools, spas, and landscaping.

This black Intermatic PJB2175 junction box features an innovative strain relief design, requiring only two screws to attach the lid to the base. The junction box provides a safe and reliable connection for up to two pool/spa lights and accepts multiple conduit sizes and its primary application is in pools, spas, and landscaping.

The Intermatic PA114 black mounting bracket is especially designed for pools, spas, and pool-spa combinations. Versatile, rugged, and simple to install, this junction box safely supports the connections of up to four high or low voltage underwater lights. These mounting brackets are for use with the PJB4175 junction box and comply with all the requirements of UL1241 and the National Electric Code.