Other Accessories

These Air Switches are designed to control one piece of equipment with one air button. The switch can safely control loads without electricity at the pool, spa or tub side, such as a pump, blower or light. Each time pressure is applied to the remote air button the connected equipment will operate as described in the table. 

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

This switch provides coordinated control for any pool/spa heater and any filter pump. It is designed to turn OFF a gas fired pool/spa heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.

The Intermatic 119T86A is a 120 volt transformer. This model is designed for use with T8845PV sprinkler and irrigation time switch. It features a metal surge strip with 6 outlets.

Intermatic 21T166A - Spacer-Standoff - 3" long - 2 pack

List Price is for Whole Pack of 2 Pieces

Temperature Probe - NTC 10k probe - 2.0 m - Gray

Temperature Probe - NTC 10k probe - 2.0 m - Blue

Temperature Probe - NTC 10k probe - 2.0 m - Yellow

Temperature Probe - NTC 10k probe - 3.0 m - Gray

Temperature Probe - NTC 10k probe - 3.0 m - Blue

Temperature Probe - NTC 10k probe - 3.0 m - Yellow

Temperature Probe - NTC 10k probe - 5.0 m - Gray

Temperature Probe - NTC 10k probe - 5.0 m - Blue

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

The sensor is designed to protect the pool and spa equipment and plumbing against freeze damage. The sensor plugs into the circuit board on the back of the P1353ME and turns ON the filter pump when air temperature drops below the programmed temperature. The freeze programming mode will not appear unless the sensor is plugged into the clock.

Use the Intermatic RC6F Universal Air Switch Button as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

Use the Intermatic RC122B Air Switch Button and Tubing for Gunite Spas as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

Use the Intermatic RC510 Air Switch Tubing Coupler as part of the Air Switch Kit to control one piece of equipment with an air button. The switch can safely control loads without electricity at the pool, spa, or tub side. For example, a pump, air blower, heater, or light can be turned on or off from the side of the pool without risk of electric shock. The tubing is run from the air button to the air control. When the air button is pushed, a blast of air travels through the tubing and engages the air control. 

Repair kit for all PAV series water valves (Includes Handle Retainer, cover screws, all o'rings)