Additional Information
Brochures & Specific Sheets
Stock Code | HLF1 LED P3 50K WFL MVOLT YKC62 DDBXD |
---|---|
Brand | Lithonia Lighting |
Fixture Type | Outdoor |
Voltage (V) | 120-277V |
Wattage (w) | 295W |
Bulb Type | LED |
Lumens (Initial) | 32467 Lumens |
CRI | 70 CRI |
Color Temperature (K) | 5000K Daylight |
Width (in) | 25'' |
Height (in) | 19'' |
Finish | Dark Bronze |
Weight (lb.) | 61 lbs |
UPC | 820476995729 |
Type | Floodlight |
Life Hours | 100,000 hours |
UL Listed | CSA |
Warranty | 5-year limited warranty |
Is DLC Approved | Yes |
HLF1
High Lumen LED Flood Luminaire
FEATURES & SPECIFICATIONS
INTENDED USE
The contemporary design of the High Lumen LED Flood reflects its embedded high performance LED technology and its versatility. It is ideal for large signage, retail, sports fields, truck yards, and many commercial applications.
CONSTRUCTION
The High Lumen LED Flood’s die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environment contaminants (IP66). Low EPA 3.6 ft2 (0.34 m2) for optimized wind loading.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS
Specular reflectors are engineered for superior field-to-beam ratios, uniformity, and spacing. Light engines are available in 3000 K (70 CRI min.), 4000 K (70 CRI min.) and 5000 K (70 CRI min.) configurations. Optional visors minimize uplight and reduce light trespass.
ELECTRICAL
Light engines consist of chip-on-board (COB) LEDs directly coupled to the housing to maximize heat dissipation and promote long life (100,000 hrs at 25°C, L83). Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. 10kV surge protection meets a minimum Category C low operation per ANSI/IEEE C62.41.2.
INSTALLATION
Integral adjustable slipfitter or yoke mounting assemblies facilitate quick and easy installation with a variety of mounting accessories. This secure connection enables the High Lumen LED Flood to withstand up to a 1.5 G vibration load rating per ANSI/IEEE C136.31.
LISTINGS
CSA certified to U.S. and Canadian standards. IP 66 rated for outdoor applications. Rated for -40°C minimum ambient conditions.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.