Compact Fluorescent (CFL) & Fluorescent Circline

Etlin Daniels CF2GX7-HSM - CF SOCKET - 13W HORIZONTAL 2 HOLE SCREW MOUNT - 75W - 600V

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

https://www.bulbspro.com/sc-2gx7-4-pin-cfl-s-e-5-13w-horizontal-screw-mount-socket-2gx7-2g7-base.html

Satco 80-1721 - 660 Watts - 660 Volts - GU24 Base - U-Channel 1/8IP Hickey - 24'' 18AWM 105° Leads

Satco 80-1605 - 660 Watts - 660 Volts - Molded White - Thermosetting Urea Copper Alloy - Double-Edge Contacts Push-In Wiring Accepts 18AWG Leads

Quick connect push-in wire terminals for 18 AWG solid or bonded Copper wire, stripped 7/16”.  Screw mounts into (2) .177” holes in panel. Cutting screws go into (2) .125” holes in socket. Two wire ports per terminal - Rated 75W, 600V

2G11 Horizontal Screw Mount Using 2 screw holes located in base legs. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”.  Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V

Snap-in mount using 2 holes into a 0.025 x 0.040” (0.6 x 1 mm) panel thickness. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”.  Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V.

Lamp position is 90° or vertical to the mounting plane. Quick connect push-in wire terminals for 18 AWG solid or Twist & Tin or solder dipped wire, stripped 3/8”. Snap-in mount into 2 holes into a 0.025 x 0.040” (0.6 x 1 mm) panel thickness. Two wire ports per terminal for easier wiring of multiple lampholder circuits - 75W, 600V

GU-24 bi-pin twist-lock configuration holds lamp or ballast in place. Quickwire terminals accept 18 AWG solid or bonded copper wire, stripped 3/8”. Wires from the back of the lampholder. Push in wire terminal models are rated 250W 600V

Etlin Daniels CFGU24-473-04 - CF SOCKET - 1/8IP SIDE HICKEY - GU-24 - Push-in Wire Terminals - 250W - 600V

Etlin Daniels CFGU24-475-RING - RING FOR 475 SOCKET - GU-24 - Outer Threaded Body - Push-in Wire Terminals - 250W - 600V

White Thermoplastic Body - Quick connect push-in wire terminals for 18 AWG Solid or Twist & Tin or solder dipped wire, stripped 7⁄16” - Twin wireways for easy harness wiring. - Wires from bottom of lampholder - Socket has 2 mounting ears to screw down to panel - Rated 120W, 600V - UL Listed & CSA Certified

Etlin Daniels FLG10Q-FL - 4 PIN FLOATING LAMPHOLDER NO MOUNTING - 120W - 600V

Satco 80-1227 - 13W Bright Gilt 2-Pin Lampholder Socket W/Fluorescent Gx23 And Gx23-2 - 75 Watts - 600 Volts

Satco 80-1228 - 13W Bright Gilt 4-Pin Lampholder Socket W/Fluorescent G24Q and GX24Q-1 - 75 Watts - 600 Volts

Satco 80-1600 - Horizontal Snap-In Mounting Lampholder with Wiring Ports Metal-Spring Retainer Clip - 660 Watts - 600 Volts

Satco 80-1601 - Shunted Horizontal Snap-In Mounting Lampholder - 660 Watts - 600 Volts

Satco 80-1602 - Shunted Vertical Snap-In Mounting Lampholder - 660 Watts - 600 Volts

Fluorescent Lampholder, with internal shunt,pedestal base, STD. Twist In, 660W-600V, Medium Bi-Pin, Color: White. With Quickwire Body containing mounting base slot, side wings, three bosses, two side slots for 20GA Panel, two base slots for 18GA panel. Body marked UL AND CSA.

G23, G23-2 Base, 5W 7W 9W 2-Pin, Compact Fluorescent Lampholder, Vertical, Bottom Snap-In/Screw Down, Color Code, , Quick-Connect 18AWG Solid or Str. Tinned - White Body