Leviton OSSNL-IDI - Decora Passive Infrared Wall Switch Occupancy Sensor - LED Adjustable Night Light - 180 Degree - 1200 sq. ft. Coverage - Ivory

Leviton OSSNL-IDI

Brand Features

The passive infrared (PIR) sensor detects motion from a heat-emitting source within its field-of-view to automatically switch lights ON and OFF, offering the same performance features as the ODS family of occupancy sensors. OSSNL has the ability to reduce (dim) and turn off the “Guide Light” function with a simple dial setting. The LED NightLight consumes less than 1/2 W providing energy savings and guide lighting when room lights are off

Features and Benefits

To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active.

Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings.

Light Sensor Adjustable Ambient Light Override ranges from approximately 2 foot-candles (20 lux) to 500+ foot-candles (5000+ lux) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings.

Light sensor enables the load hold-OFF feature once level has been set.

Vacancy confirmation - when the time out expires and the relays turn OFF, a 30 second vacancy confirmation exists to turn the relays back ON.

False detection circuitry.

Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied

LED NightLight offers “Guide Light” functionality.

Adjustable NightLight illumination setting for continuous or dimmed NightLight.

NightLight Mode - the factory default setting for the NightLight Mode is Dimmed Mode. This means the NightLight will automatically dim to 5% of full bright-ness after 2 minutes of no occupancy when activated by the internal light sensor.

One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts.

Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts.

Exclusive Levition H.I.S. Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service.