Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Lovato LRXSW - PROGRAMMING AND SUPERVISION SOFTWARE (CD-ROM)

Be the first to review this product

Lovato LRXSW - PROGRAMMING AND SUPERVISION SOFTWARE (CD-ROM)

 

Availability: In stock

$93.04

/

Additional Information

Brochures & Specific Sheets


Stock Code LRXSW
Brand Lovato
UPC 8013975188545
UL Listed EAC
Notes HS Code: 85234945
Cross Refefence Conformity:
IEC/EN 61131-2
UL508
CSA C22.2 n° 142

Power supply unit and backup memory general characteristics

– The LRX 1V3 D024 power supply produces a direct-current voltage to power the LRD base and expansion modules in circumstances when 24VDC is not available in the application. The power supply can also be used to power eventual 24VDC auxiliary circuits.
– The LRX M00 backup memory allows to save the user’s program and to simply and quickly transfer it to the base modules.

HMI panel LRX P01 general characteristics

– 24VDC power supply
– RS232 communication port:
• Direct connection to LRD using LRX C00
• Connection to other devices using a standard D-SUB 9 serial cable
– RS485 communication port
– LRX SW P01 editor software for specific pages and easy use
– IEC degree of protection: IP65.
FUNCTIONS
– Send commands
– Read status
– Provide static and dynamic texts
– Write variables
– Read variables:
• Numerical value
• Bar graph
• Trend line.

Programming

At any time and with extreme simplicity, LRD can be set up and reprogrammed to satisfy new requirements and improve the operation of a system.
Programming is simple and intuitive and can be done directly on the base module keypad or by personal computer, connected by LRX C00 (RS232) or LRX C03 (USB) interface and using the relative LRX SW software.
With a personal computer, two programming language locs can be used: FBD (Function Block Diagrams) and LADDER (contact scheme).
Both of the following can be accomplished:
– Simulate the program directly “off-line” on a personal computer to test if it runs correctly.
– Use the supervision mode to check the project “on-line”.

There are 8 function keys on front, dedicated to onboard adjustment, control and supervision of digital input and output status, analog input values, time and date entry and the operation status of the micro PLC itself.

Certifications and compliance

Certifications obtained: UL Listed, for USA and Canada (cULus - File E300049), as Programmable Controllers for power supply and HMI units and base module of kits.
Compliant with standards: IEC/EN 61131-2, UL508, CSA C22.2 n°142.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.