Lovato LVFSN1B15 - FLOAT SWITCH FOR DIRTY WATER - NEOPRENE CABLE - 15MT LONG

Operational characteristics

These float switches are used for the civil and industrial control of levels of dirty water, e.g. sewage or waste water from industry. The float switches comprises of a one-piece external blow-moulded polypropylene casing, with fixed internal counterweight located in the cable exit area.
The regulator contact is positioned centrally in its own watertight chamber. This is insulated from the external casing by injecting closed-cell foam. This solution further increases protection against moisture leakage and heat insulates the watertight chamber housing the contact, eliminating the creation of condensation.
– Activation angle -15°...+15°
– Internal counterweight
– Float casing material: polypropylene
– Cable H07 RN-F3X1 (Neoprene) available in lengths of 5, 10, 15 and 20m
– Rated cable diameter: 9mm
– Relay with changeover contact 10(4)A 250VAC 50/60Hz
– Maximum installation depth: 50m
– Maximum pressure: 5bar
– Operating temperature: 0…+40°C
– Storage temperature: -20…+70°C
– IEC degree of protection: IP68
– Insulation class: II.

Certifications and compliance

Certifications (pending): TÜV.
Compliant with standards: IEC/EN 60730-1. IEC/EN 60730-2-15.