Additional Information
Stock Code | PRO-1355-24H-90-MN |
---|---|
Brand | Liteline |
Fixture Color | Matte Nickel |
Voltage (V) | 24V DC |
Wattage (w) | 3.5 Watts |
Beam Angle | 100° |
Bulb Type | LED |
Lumens (Initial) | 226 |
CRI | 90+ |
Color Temperature (K) | 5500K |
Width (in) | 3-5/32" |
Height (in) | 15/16" |
Dimmable | Yes |
Material | Aluminum and Steel |
Mounting | Surface or Recess |
UPC | 771250772831 |
Start Temp. (Min) | -20°C (-4°F) |
Start Temp. (Max) | 40°C (104°F) |
Life Hours | 35,000 hrs |
UL Listed | cETLus |
Warranty | 3 Years |
Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com |
Features
Puck Light
The 3.5 watt LED puck is constructed with a steel face plate and die cast aluminum body. The diffuser frosted glass lens and reflector provides for even light distribution, while maintaining low heat dispensation.
Light Output
This LED puck light is available in warm white (3000 K) and cool white (5500 K) color temperatures, providing 226 lumen output, 100° beam spread. Dimmable when used with compatible dimming drivers.
Power Consumption
Pro Puck operates at 3.5 Watts. Required a Class II 24V DC constant current magnetic or electronic driver.
Linkability
Hardwire: Each fixture provided with 22 AWG 2-SPL wire for hardwiring to other fixtures and driver. Use wire type and gauge suitable for application to connect the fixtures. Total wattage of fixtures attached to any driver should not exceed 80% of the total wattage designated by the driver.
Mounting
Pro Pucks can be surface or recess mounted. For recessed mounting, the 3 torsion clips must first be removed (see diagram below). Attach fixture to the surface using screws, perfect for commercial or high vibration areas. Screw heads are concealed by the magnetic faceplate.
Face and Body Color Options
The magnetic tabs on the puck light allows for an easy color change, by removing the steel trim ring and interchangeable mounting collar. PRO-P1-PRI (sold separately) is a paint– ready primed trim ring for the 24V LED puck lights. This plate can be custom painted to any color to match any decor. Plate is suggested for recessed applications only.