Additional Information
Stock Code | SLBIS24144-2D6LAGY |
---|---|
Brand | Stanpro Lighting |
Family | DUST-TIGHT STEEL BATTERY UNIT |
Voltage (V) | 120/347 Volt |
Width (in) | 12.25 |
Height (in) | 18 |
Depth (in.) | 8.125 |
Bulb Type | LED |
Bulb Shape | MR16 |
Base Type | GU5.3 |
Wattage (w) | 144 Watt |
Bulb(s) Included: | Yes |
Color | White |
Battery Back Up | Yes |
Battery Type: | 2 x 12VDC Sealed Lead-Acid Ni-Cad 13Ah |
Recharge Time: | 24 Hours. |
Housing | Steel Housing |
IP Rating | Type 4X |
Mounting | Top head mounting is standard, side mount is optional |
Lamp Head Wattage: | (2) x 6 Watt |
Fixture Type | Indoor/Outdoor |
UL Listed | Meets requirements of ICES-005 |
Finish | Grey |
Warranty | 1 Year |
Cross Refefence | Emergency Lighting Spacing Guide Attached (see above pdf file) Voltage Drop Formula Attached (see above pdf file) Emergency Lighting Options Attached (see above pdf file) AT Option - Auto Test & Self Diagnostic Attached (see above pdf file) |
SLBIS
DUST-TIGHT STEEL BATTERY UNIT
The SLBIS series of NEMA12 and EEMAC12 rated steel battery units are designed to perform in demanding industrial locations. The fully gasketed, all steel housing is kept dust-tight with sturdy, screw lock latches. The SLBIS series is available in 6VDC, 12VDC and 24VDC versions in a range of wattage capacities between 36 and 360W, for 30 minutes duration. Units are typically supplied with two top mounted PAR36 weatherproof heads, however a wide range of head type, number and placement are available. The SLBIS can also accommodate a variety of options, including auto-testing self-diagnostics and remote testing.
• Circuitry
−−120/347VAC or 277VAC 60Hz Input
−− High efficiency, rapid recovery, precision control charging system
−−30 minutes emergency power duration standard
−−Dust-tight, momentary push button test switch
−−Diagnostic/pilot LEDs for AC ON and CHARGE
−−Brownout and short circuit protection
−−Temperature compensated
−− Large magnum terminal screw type connectors for remote load connection
−−Complete battery recharge in 24 hours
−−Maintenance free, sealed lead acid battery
−− Optional automatic-testing, self-diagnostic charger board
• Mechanical
−−20 Gauge steel construction
−−NEMA12 / EEMAC12 rated design
−−Four integral mounting holes (one per corner)
−− 120VAC line cord with dust-tight strain relief supplied standard
−−I ndustrial grey powder coat finish standard, other finishes optional
−− Lamp heads include weatherproof PAR36 large style* and die cast metal MR16
−−Top head mounting is standard, side mount is optional
• Approvals
−−CSA Certified to C22.2 #141-15
• Compliance
−−Meets requirements of ICES-005