Edwards 276-GLR - Replacement Break Rods For 276 Stations - 20 Per Package

INPUT DEVICES

Overview

The 276B-1120 noncoded fire alarm station is a contemporary styled Lexan station, flexibly designed to meet a wide variety of application requirements and operational sequences.

The station is single action with terminals for field wiring connections.

A key (supplied) is required to reset mechanism.

For semi flush mounting use a standard North-American 4 inch square box with single gang plaster cover having an overall minimum depth of 2-1/4 inches (57mm). For surface mounting use a Cat. No. 276B-RSB surface back box.

Standard Features

• Single pole contacts
• Terminals for field connections
• General alarm operation
• Key lock reset
• Break glass operation
• Surface or semi flush mounting
• Red finish
• Contemporary styling
• Rugged LEXAN construction
• Latch action until reset

Operation

To initiate an alarm and break the glass rod on the 276B-1120, pull down on the handle marked “Pull for Fire”.

The alarm handle latches in the pulled position until the station is manually reset. To reset, the station is opened using a Cat. No. 276-K1 key supplied with the station; the toggle switch is restored to its normal position, the break glass rod is replaced and the station is reclosed.