Etlin Daniels 3120CT - 3100 Series Crimping Tools - Industry Standard - INSULATED TERMINAL CRIMP TOOL

3100 Series Crimping Tools

The 3100 Series, the standard of the industry, the product by which all other crimp tools are judged is available for most connector applications. This tool has been the choice of professionals for over three decades. Longevity of operation coupled with fully machined crimp cavities, provide the level of performance required for the most stringent commercial applications. The years of association with the major connector manufacturers is apparent by the exacting crimps produced by these tools.

Features:

• Crimp cavities conforming to industry standards

• Longevity of operation is assured with this time-tested design

• The simple trouble-free full cycle mechanism assures consistent terminations

• Each tool is precisely engineered for a specific requirement

• All crimp cavities are fully machined in high carbon steel, then heat-treated

3120 CT

• Crimps conductor portion of insulated terminals

• Crimps are produced in three cavities: Red 22-16 AWG; Blue 16-14 AWG; Yellow 12-10 AWG

3125 CT

• Crimps non-insulated terminals and splices

• Crimps are produced in three cavities: 22-16 AWG; 16-14 AWG; 12-10 AWG

3126 CT

• Crimps a wide variety of open barrel contacts, including D-subminiature in small size ranges

• Crimps conductor and insulation portion of contacts in separate cavities -- tool must be closed twice to complete termination

• Oval type insulation crimps are produced in two cavities: B 20-16 AWG; D 30-22 AWG

• B type conductor crimps are produced in three cavities: A 18-16 AWG; C 22-20 AWG; E 30-24 AWG

3140 CT

• Crimps conductor and strain relief portion of insulated terminals and splices in one tool closure

• Crimps are produced in two cavities: Red 22-16 AWG/Blue 16-14 AWG; Yellow 12-10 AWG

• A locator and wire stop are provided