Additional Information
| Stock Code | 3BEMW LED 40K 90CRI M4 |
|---|---|
| Brand | Lithonia Lighting |
| Fixture Type | Indoor/Outdoor |
| Voltage (V) | 120V |
| Wattage (w) | 7.9 W |
| Bulb Type | LED |
| Lumens (Initial) | 510 lumens |
| CRI | 90 |
| Color Temperature (K) | 4000K Cool White |
| Height (in) | 3'' |
| Finish | matte white |
| Dimmable | Yes |
| Socket Type: | E26 socket adapter |
| UPC | 191723028577 |
| Type | LED Module |
| Life Hours | 28,000 hours |
| UL Listed | CSA Listed |
| Warranty | 5-year limited warranty |
3BE
3” LED Module
FEATURES & SPECIFICATIONS
INTENDED USE — Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Compliant friction clip retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 28,000 hours. Indoor and Outdoor Use.
CONSTRUCTION — Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.
OPTICS — White baffle recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even illumination throughout the space.
Wide flood beam angle at > 45°.
ELECTRICAL — High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. See page 2 for recommended triac dimmers.
Standard input wattage is 7.3 W, 63 lumens per watt (3000 K); equivalent to 45 watt PAR20.
INSTALLATION — Suitable for installation in standard height rough-in sections.
E26 socket adapter and ships standard.
Friction clips allow fitment into cans with an inside diameter of 3.0" to 3.5".
LISTINGS — CSA certified for use in the US and Canadian safety standards. Can be used to comply with California Title 24, Part 6 high efficacy LED light source requirements. ENERGYSTAR® qualified. WSEC ASTM E283 for Air-Tight. Wet location listed.
WARRANTY — 5-year limited warranty.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$72.85
|
$65.10
|
$80.60
|
$19.36
|
$80.60
|
$25.00
|
$32.00
|
$74.40
|
