Lithonia Lighting 4SEMW LED 30K 90CRI M6 - 4'' Smooth LED Module - Matte White - 3000K Warm White - 9.8W - 700 Lumens - 90 CRI - 120V - Replaces Up To 65W Incandescent

Specifications
INTENDED USE:
Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Compliant friction clip retention allows itment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 54,000 hours. Indoor and outdoor use.

CONSTRUCTION:
4BEMW has an aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.

OPTICS:
Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 Lamp. Wide flood beam angle at > 45°.

ELECTRICAL:
Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart. 700-lumen E series has an input wattage of 9.8 watts, 71 lumens per watt, equivalent to 65-watt incandescent. E Series' patent pending driver has zero inrush which allows power loads to be calculated with actual rated wattages. Example: 61 units of 4BEMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/9.8W. = 61 fixtures.

INSTALLATION:
Suitable for installation in standard height rough-in sections. E26 socket adapter ships standard, except for the 4BEMW LED 27K version in the state of California (L/SKTWHIP option must be selected). Friction clips allow fitment into cans with an inside diameter of 4.0” to 4.5"