Edwards 5533M-AQ - Hazardous Location Signal - Adaptatone - Explosionproof - Two Signal - 55 Tone Model - 24VAC/24Vdc/36Vdc - 1.320A/0.470A/0.600A

Hazardous Location Signals

Electronic Signals

Overview

Hazardous location Adaptatone signals are designed for industrial applications where high audible output, on-site tone selection, microprocessor reliability, and safety in a hazardous location is required. Each hazardous location Adaptatone signal is cUL certified and offers 55 tone selection with two signal capability. All solid state. Fully enclosed, heavy duty zinc cast construction. Durable corrosion resistant electrostatic heat flowed powder epoxy gray finish. 55 tone capability is an integral part of each Adaptatone Signal. Additional tone modules or parts are not required, thus permitting easy selection of any tone required to overcome background or ambient sounds. Each signal has an internal volume control.

Installation and Mounting

Mounts on any solid surface using three bolts. May be swivelled through 180 degrees, vertically or horizontally, depending on mounting of bracket. Cat. No. 5533M units are fitted with sealed, threaded 1/2" fitting and 30" numbered wire leads for connection to local power source.

Standard Features

• cUL certified for:
– Class l, Division 1 and 2, Groups B, C, and D
• AC or DC operation
• Two signal capability
• Microprocessor reliability
• 55 programmable tone selection
• Priority tone selection capability
• Solid State

5533M Series Hazardous Location

Signal accepts up to two contact closures and delivers two different user selected audible output signals. Both tones are programmable and are selected from the 55 tones available within the signal. One of the tones can be assigned a priority status i.e. will override the other tone. Cat. No. 5533M is designed for use in Class l, Division 1, Groups B, C, and D, and Division 2, Group A hazardous locations.