Edwards 5560M-AQ - Electronic Signal - Adaptatone Millennium Mini-Mi Signal - 24VDC or 24VAC - 50/60 Hz - White - NEMA Type 3R

Audible Signals

Electronic Signals

Overview

The GE Security 5560M Millennium Mini-Mi is a compact tone and voice generator which is completely modular in construction. The 5560M base unit is supplied with or without a 110 candela strobe. One of five optional modules may be installed in the base unit.

The 5560M is configured for stand-alone operation when installed with the 556T-M Tone Module Board. One tone may be dipswitch selected from a choice of 55 tones and will be played whenever power is applied to the unit. When installed with the 556T‑M485 Tone Module Board, any of the available 55 tones can be activated over an RS485 Network.

When configured with the 556V-M Voice Module Board, the unit is capable of stand-alone voice operation. When power is applied to the unit it will play up to 20 seconds of one pre-recorded, field programmed voice message.

The 5560M is capable of system operation when fitted with an audio coupler board. The 556A-M Audio Coupler Board allows the Mini-Mi to be operated as a system speaker amplifier over any system that outputs 10, 25, or 70.7 VRMS. Audio input voltage is selected on the audio coupler through an onboard jumper. The 5560M Mini-Mi may also be used as a system signal on an RS485 network using the 556A-M485 Audio Coupler Module Board.

Standard Features

• Compact, modular design allows unit to be configured with tone, voice, audio coupling or RS485
• 10, 25 or 70.7VRMS audio input boards available
• Internal volume control
• Strobe available
• Weatherproof
• cUL Listed
• NEMA Type 3R
• 24V AC/24V DC, 120V AC, 16-33V DC
• Rugged Lexan construction

Applications

The 5560M Mini-Mi is ideal for sounding stand-alone or system tones and voice in factory hallway, office and personnel areas where the use of large, horn type devices is not desirable because of sound output and appearance issues. The Mini-Mi may also be used for emergency signaling applications, where operation and control of high decibel audio and voice is required for plant or area-wide tone and voice notification.

Installation and Mounting

The Mini-Mi mounts to any standard 4” (102mm) backbox and is suitable for outdoor mounting when mounted to the 449 backbox or any weatherproof 4" (102mm) box.