Lithonia Lighting 65BEMW LED 30K 90CRI M6 - 5"/6" Baffle LED Module - 835 Lumens - 3000K Bright White - 120V - Matte White - CRI 90+ - 6 Packs

65BE

FEATURES & SPECIFICATIONS

INTENDED USE

Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Adjustable torsion spring and retention allows fitment into many 5" and 6" cans. The LED module maintains at least 70% light output for 35,000 hours. Indoor and Outdoor Use.

CONSTRUCTION

Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.

OPTICS

Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 Lamp.
Wide flood beam angle at > 45°.

ELECTRICAL

Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart.
835-lumen E series has an input wattage of 11.9 watts, 70 lumens per watt, equivalent to 65-watt incandescent.
E Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages.
Example: 50 units of 65BEMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/11.9W = 50 fixtures.

INSTALLATION

Suitable for installation in standard and shallow-height rough-in sections.
E26 socket adapter ships standard.
Twin torsion springs ensure easy installation for 5" and 6" recessed housings.

LISTINGS

CSA certified to US and Canadian safety standards. ENERGY STAR® certified. Can be used to comply with California Title 24 Part6 High Efficacy LED Light Source Requirements. Wet location listed.
WSEC ASTM E283 for Air-Tight (with IC housings).

WARRANTY

5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.