Aimco A-123P - Four Hole Flat Plate - 9/16'' Hole Dia. - 1/4'' Thickness - 1 5/8'' Width - Hot-Dip Galvanized Finish - 50/Box

General Fittings

FUNCTIONS AND FEATURES

Strut Fittings are strong, quick, economical and adjustable, they provide a unique weldless connection method to the metal framing system. A typical method of connecting a strut fitting to the strut channel is to insert the spring nut anywhere along the continuous slotted channel.
The rounded spring nut ends permit easy insertion. Then a 90° clockwise turn aligns the grooves in the spring nut with the returned edge of the channel. Strut Fittings can be placed anywhere along the channel opening, permitting complete freedom of adjustment. Insert the bolt through the fitting and into the spring nut, additional channel sections can now be bolted to the fitting already in place. Tightening with a wrench locks the serrated teeth of the spring nut into the returned edge of the channel, completing a strong, vise-like connection.
Part drawings illustrate only one application or function of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are 1 5/8" wide, except where noted otherwise.
Strut Fittings are designed to fit with all sizes of 1 5/8” wide channels. Unless otherwise specified, fittings are manufactured from 1/4” thick carbon steel, 1 5/8” wide, all holes are 9/16” diameter, spaced 1 7/8” on center, and 13/16” from the end.

MATERIAL

Hot-Rolled Steel (ASTM A1011/A1018)
Stainless Steel - Type 304 or 316 (ASTM A240)

FINISH

Hot-Dip Galvanized (ASTM A123)
Zinc Electro-Galvanized (ASTM B633)

STAINLESS STEEL OPTIONS

All Strut Fittings are available in 304 Stainless Steel or 316 Stainless Steel (ASTM A240)

NOTE

The more popular Strut Fittings are illustrated on the following pages. However, there are many other fittings available. Please contact us for any other fittings you may need for specific applications.