Additional Information
| Stock Code | A-FIG 406Z 7/8 |
|---|---|
| Brand | Aimco |
| Family | Pipe Hangers & Supports |
| Length (in) | 2.38'' |
| Material | Malleable Iron, with hardened steel cup point set screw |
| Finish | Zinc Electro-Galvanized |
| UL Listed | cULus , FM |
| Notes | Maximum recommended set screw torque value for 3/8”-16 set screw size is 60 in.-lbs. (nm 6.8). Caution should be taken not to over tighten set screw. Set screw must be tightened and torqued onto the sloped side of the I-beam. Recognizing that torque wrenches are generally not used or available on many job sites, the set screw should be tightened so it contacts the I-beam, and then an additional 1/4” to 1/2” turn added. |
| Cross Refefence | Pentair 300G Taylor Pipe Support 406Z |
SMALL MOUTH BEAM CLAMP
FUNCTION: Designed for attaching hanger rod to the flange of a beam or bar joist, where flange thickness does not exceed 3/4”.
APPROVALS: Complies with Manufactures’ Standardization Society (MSS) SP-58 & SP-69 (Type 19). Complies with Federal Specifications A-A-1192A (Type 19).
CERTIFICATIONS: Complies with Underwriters’ Laboratories (UL) & (cUL) (EX16266, 406), (EX16204, JKL), Factory Mutual (FM), sizes 3/8” – 1/2” UL, cUL, FM approved
MATERIAL: Malleable Iron, with hardened steel cup point set screw
FINISH: Available in Plain and Zinc Electro-Galvanized
NOTE: Maximum recommended set screw torque value for 3/8”-16 set screw size is 60 in.-lbs. (nm 6.8). Caution should be taken not to over tighten set screw.
Set screw must be tightened and torqued onto the sloped side of the I-beam. Recognizing that torque wrenches are generally not used or available on many job sites, the set screw should be tightened so it contacts the I-beam, and then an additional 1/4” to 1/2” turn added.
$557.00
|
$409.29
|
$224.00
|
$238.00
|
$253.50
|
$183.00
|
$126.00
|
$114.00
|
