Additional Information
| Stock Code | A-FIG 407 3/8 |
|---|---|
| Brand | Aimco |
| Family | Pipe Hangers & Supports |
| Length (in) | 1.58'' |
| Material | Malleable Iron, with hardened steel cup point set screw |
| Finish | Available in Plain |
| UL Listed | cULus , FM |
| Notes | Maximum recommended set screw torque value for 3/8”-16 set screw size is 60 in.-lbs. (nm 6.8). Caution should be taken not to over tighten set screw. Set screw must be tightened and torqued onto the sloped side of the I-beam. Recognizing that torque wrenches are generally not used or available on many job sites, the set screw should be tightened so it contacts the I-beam, and then an additional 1/4” to 1/2” turn added. |
| Cross Refefence | Pentair 310 CCTF A3033 Taylor Pipe Support 407 |
WIDE MOUTH BEAM CLAMP
FUNCTION: Designed for attaching hanger rod to the flange of a beam or bar joist, where the flange thickness does not exceed 1 1/4”.
APPROVALS: Complies with Manufactures’ Standardization Society (MSS) SP-58 & SP-69 (Type 19). Complies with Federal Specifications A-A-1192A (Type 19).
CERTIFICATIONS: Complies with Underwriters’ Laboratories (UL) & (cUL) (EX16266, 407), (EX16204, JKH), Factory Mutual (FM), sizes 3/8” – 1/2” UL, cUL, FM approved
MATERIAL: Malleable Iron, with hardened steel cup point set screw.
FINISH: Available in Plain and Zinc Electro-Galvanized
NOTE: Maximum recommended set screw torque value for 3/8”-16 set screw size is 60 in.-lbs. (nm 6.8). Caution should be taken not to over tighten set screw.
Set screw must be tightened and torqued onto the sloped side of the I-beam. Recognizing that torque wrenches are generally not used or available on many job sites, the set screw should be tightened so it contacts the I-beam, and then an additional 1/4” to 1/2” turn added.
$287.50
|
$290.00
|
$147.00
|
$29.22
|
$444.00
|
$266.00
|
$284.00
|
$124.00
|
