Appliance Installation

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 5/16"
- Screw Head: 1/4"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 5/16"
- Screw Head: 1/4"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

Replacement Splash Guard used on some InSinkErator® and Kenmore® Garbage Disposal models.

The unique Granite Grabber™ system provides a strong, secure, vibration resistant solution that does not compromise the integrity of the solid surface countertop.

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- 6 ft Stainless Steel Hose with 3/8" Brass Elbow fitting
- 6 ft Grounded Electrical Cord 16/3 AWG
- Worm Gear Clamp
- 3 - Yellow Wire Nuts

- Durometer hardness: 44D
- Brittleness Temperature: -103°F
- Maximum temperature: 120°F
- Working pressure: 268 psi @ 73°F
- OD: .3125" (5/16")
- Wall: .062" (1/16")
- ID: 0.1875" (3/16")

- Durometer hardness: 44D
- Brittleness Temperature: -103°F
- Maximum temperature: 120°F
- Working pressure: 205 psi @ 73°F
- OD: 0.25" (1/4")
- Wall: 0.040"
- ID: 0.17"

Replacement Splash Guard used on some InSinkErator® and Kenmore® Garbage Disposal models.

The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring.

Both ends have a straight female hose fitting. ⅜" flow, rubber hose. Solid brass ferrule with 3/4" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

One end has a straight female hose fitting, the other has a 90° elbow. Solid brass ferrule with ¾" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

Both ends have a straight female hose fitting. ⅜" flow, rubber hose. Solid brass ferrule with 3/4" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.