Appliance Installation

One end has a straight female hose fitting, the other end has a female elbow. Rubber hose. Solid brass ferrule with 3/4" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

Both ends have a straight female hose fitting. Rubber hose. Solid brass ferrule with 3/4" GHT treated steel nut. 300 PSI working pressure, 900 PSI burst.

 Includes 1 - 1' line,  2 - 5' line, & 1 - Y Connnector. Upgrades steam dryer installations to stainless steel.

 Includes 1 - 1' line,  3 - 5' line, & 1 - Y Connnector. Upgrades steam dryer installations to stainless steel.

- Braided stainless over PVC tube
- NSF certified, lead free
- Kit includes: 1405DWSS, 90° GHT adapter

The unique Granite Grabber™ system provides a strong, secure, vibration resistant solution that does not compromise the integrity of the solid surface countertop.

The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring.

Replacement Splash Guard used on some InSinkErator® and Kenmore® Garbage Disposal models.

- Durometer hardness: 44D
- Brittleness Temperature: -103°F
- Maximum temperature: 120°F
- Working pressure: 205 psi @ 73°F
- OD: 0.25" (1/4")
- Wall: 0.040"
- ID: 0.17"

- Durometer hardness: 44D
- Brittleness Temperature: -103°F
- Maximum temperature: 120°F
- Working pressure: 268 psi @ 73°F
- OD: .3125" (5/16")
- Wall: .062" (1/16")
- ID: 0.1875" (3/16")

- 6 ft Stainless Steel Hose with 3/8" Brass Elbow fitting
- 6 ft Grounded Electrical Cord 16/3 AWG
- Worm Gear Clamp
- 3 - Yellow Wire Nuts

Replacement Splash Guard used on some InSinkErator® and Kenmore® Garbage Disposal models.

- Band Width: 5/16"
- Screw Head: 1/4"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 5/16"
- Screw Head: 1/4"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 1/2"
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package

- Band Width: 1/2''
- Screw Head: 5/16"
- Screw head fits SAE nut driver or flat head screw driver
- 10 Clamps per package