AUTOMATION

Housing material: Thermoplastic Polyester - Rated operational voltage: 20-250 VAC - Adjustable sensing distance 2-20 mm - Output: SCR - High noise immunity - Non-flush types - Cable versions

- Featuring TRIPLESHIELD sensor protection - Rated operational voltage: 20-250 VAC - Adjustable sensing distance 2-16 mm or 4-25 mm - Output: SCR - Make and break switching function - High noise immunity - Flush and non-flush types - Plug and cable versions available

SPDT Relay Output - Housing Diameter 32mm - Sensing Distance 20mm - 24 VAC/DC Supply Voltage - 5m PVC Cable - Time Delay: 1s-10min

Housing material: Thermoplastic Polyester - Rated operational voltage: 20-250 VAC - Adjustable sensing distance 3-12 mm - Output: SCR with fixed delay of 30 sec. - High noise immunity - Non-flush types - Cable versions - ATEX zone 22 dust (The cable must not be exposed to a pulling force.)

Flat Pack Polycarbonate Housing - Adjustable sensing distance 4-25 mm - Rated operational voltage: 10-40 VDC - Make (NO) and Break (NC) Switching - LED indication - Plug: M12 x 1

Capacitive proximity switches with either sensing distance 8 mm flush mounted in metal or sensing distance 12 mm non-flush mounted. 2-wire AC output with make (NO) or break (NC) switching. Grey M18 polyester housing with 2 m PVC cable or M12 plug. Ideal for use in level and plastic machinery applications.

18mm Cylindrical PBTP Housing - Range: 3m - Modulated infrared light - Supply voltage: 20 to 250 VAC - Degree of protection: IP67 - LED-output indication - High immunity to ambient light - Cable: PVC, grey, 2m

Housing: 10 x 30 x 20 mm - Range: 6 m, with reflector - Sensitivity adjustment by Teach-In programming - Modulated, red light 660 nm, polarized - Supply voltage: 10 to 30 VDC - Make and break switching function programmable - LED indication for output, stability and power ON - Dust alarm output

Multiplexed Photoelectric Sensor - Emitter - Sensing Distance 15m - Housing Diameter 12mm - Optical Angle 4° - Cable Connection

Housing: 17 x 50 x 50 mm - Adjustable sensitivity - Modulated, visible red light - Supply voltage: 10 to 30 VDC - Output: 200 mA, NPN or PNP selectable - Make and break switching function selectable - LED for output indication, signal stability and power ON - Protection: reverse polarity, short-circuit, transients

Doors and Entrance control,Range 12 m,Modulated, infrared light.Supply voltage: 10 to 30 VDC,Output: 100 mA, PNP type.Make or break switching,LED for output indication or power supply,Protection: reverse polarity, short circuit, transients.Cable versions.

Range: 3m - Modulated red light - Supply voltage: 10 to 40 VDC - Make and break switching function, LED indication - Protection: Reverse polarity, short-circuit, transients - High immunity to ambient light - Cable: PVC, grey, 2m

Range 0.8 meters, Modulated, infrared light,Make or break switching function (switch selectable),LED-indication for target detected.Multi supply voltage:12 to 240 VDC and  24 to 240 VAC, 50/60 Hz. PC housing, IP 67,NO and NC output .PG 13.5 Cable Gland Connection.

 Infrared Background suppression sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Offdelay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF. Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Plastic Rectangular Housing: 10 x 30 x 20 mm - Normal Trimmer (Back Trimmer) - PointSpot Emitter - Sensitivity Adjustment By Potentiometer - Modulated, Red Light 621 nm - Supply voltage: 10 to 30 VDC - Make and Break Switching Function - Easy mounting since only the sensor must be aligned with the reflector - Power supply necessary only on one side of the application - Cable: 2m, 4-wire, PVC, Black

18mm Cylindrical PBTP Housing - Range: 2.0m - Modulated red light, polarized - Supply voltage: 20 to 250 VAC - Degree of protection: IP67 - LED-output indication - Improved immunity to reflecting surfaces - Plug: M12 x 1

Miniature sensor range:250mm,The visible red PointSpot light makes alignment very easy.Sensitivity adjustment by potentiometer,Modulated, red light 617nm.Supply voltage: 10 to 30 VDC,Output: 100 mA, PNP preset.Make and break switching function,LED indication for output,stability and power ON.Protection:reverse polarity,short circuit and transients.Cable versions.Excellent EMC performance,Power supply necessary only on one side of the application.

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by Teach-In programming - Modulated, red light 660 nm - Supply voltage: 10 to 30 VDC - Make and break switching function programmable - LED indication for output, stability and power ON - Dust alarm output

Red Background suppression Long Range sensor with IO-Link with a adjustable distance of 25 to 360 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors. Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Offdelay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF.Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.