AUTOMATION

Range: 400 mm adjustable - Modulated, infrared light - Supply voltage: 10 to 40 VDC - Make and break switching function, LED indication - Protection: Reverse polarity, short-circuit, transients - High immunity to ambient light - Cable: PVC, grey, 2m

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by Teach-In programming - Modulated, Infraredred light 880 nm - Supply voltage: 10 to 30 VDC - LED indication for output, stability and power ON - Mute function (sensor blanking)

Multiplexed Photoelectric Sensor - Receiver - Sensing Distance 15m - Housing Diameter 12mm - Optical Angle 4° - Cable Connection

Housing: 17 x 50 x 50 mm - Adjustable sensitivity - Modulated, visible red light - Supply voltage: 10 to 30 VDC - Protection: reverse polarity, transients

Doors and Entrance control,Range 12 m,Modulated, infrared light.Supply voltage: 10 to 30 VDC,Output: 100 mA, NPN type.Make or break switching,LED for output indication or power supply,Protection: reverse polarity, short circuit, transients.M8 Connector.

Range: 3m - Modulated red light - Supply voltage: 10 to 40 VDC - Make and break switching function, LED indication - Protection: Reverse polarity, short-circuit, transients - High immunity to ambient light - Cable: PVC, grey, 2m

Range 0.8 meters, Modulated, infrared light,Make or break switching function (switch selectable),LED-indication for target detected.Multi supply voltage:12 to 240 VDC and  24 to 240 VAC, 50/60 Hz. PC housing, IP 67,NO and NC output .1/2" NPT Cable Gland Connection.

Red Background suppression sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Offdelay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF. Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Plastic Rectangular Housing: 10 x 30 x 20 mm - Normal Trimmer (Back Trimmer) - PointSpot Emitter - Sensitivity Adjustment By Potentiometer - Modulated, Red Light 621 nm - Supply voltage: 10 to 30 VDC - Make and Break Switching Function - Easy mounting since only the sensor must be aligned with the reflector - Power supply necessary only on one side of the application - Plug: M8, 4-pin, male

18mm Cylindrical PBTP Housing - Range: 2.0m - Modulated red light, polarized - Supply voltage: 20 to 250 VAC - Degree of protection: IP67 - LED-output indication - Improved immunity to reflecting surfaces - Plug: M12 x 1

Miniature sensor range:250mm,The visible red PointSpot light makes alignment very easy.Sensitivity adjustment by potentiometer,Modulated, red light 617nm.Supply voltage: 10 to 30 VDC,Output: 100 mA, NPN preset.Make and break switching function,LED indication for output,stability and power ON.Protection:reverse polarity,short circuit and transients.Plug versions.Excellent EMC performance,Power supply necessary only on one side of the application.

Housing: 10 x 30 x 20 mm - Range: 6 m, with reflector - Sensitivity adjustment by Teach-In programming - Modulated, red light 660 nm, polarized - Supply voltage: 10 to 30 VDC - Make and break switching function programmable - LED indication for output, stability and power ON - Dust alarm output

Miniature sensor range:200mm,Sensitivity adjustment by potentiometer,Modulated, red light 625nm.Supply voltage: 10 to 30 VDC,Output: 100 mA, NPN preset.Make and break switching function,LED indication for output,stability and power ON.Protection:reverse polarity,short circuit and transients.Cable versions.Excellent EMC performance,Exelent colour matching.

Housing: 17 x 50 x 50 mm - Adjustable sensitivity - Modulated, visible red light - Supply voltage: 10 to 30 VDC - Output: 200 mA, NPN or PNP selectable - Make and break switching function selectable - LED for output indication, signal stability and power ON - Protection: reverse polarity, short-circuit, transients

Doors and Entrance control,Range 12 m,Modulated, infrared light.Supply voltage: 10 to 30 VDC,Output: 100 mA, NPN type.Make or break switching,LED for output indication or power supply,Protection: reverse polarity, short circuit, transients.Cable versions.

Range 6 meters, Modulated, red Light, Polarized, Make and Break Switching Function , LED-indication for output,stability and power ON. Multi supply voltage: 10 to 30 VDC. NO and NC Output, PMMA/ABS Housing IP67, Cable Connection.

Range: 2m - Modulated red light, polarized - Supply voltage: 20 to 250 VAC - Output: 500 mA SCR - LED-output indication - Improved immunity to reflecting surfaces - Protection: Transients - Plug: M12 x 1

 Infrared Background suppression sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Offdelay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF. Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Plastic Rectangular Housing: 10 x 30 x 20 mm - Top Trimmer - Polarized Retro-Reflective - Red Light - Selectable functions: NPN, PNP, Push-Pull, External Input (only pin 2) or External teach input (only pin 2) - Selectable: N.O. or N.C. - Cable: 2m, 4-wire, PVC, Black