Automation and Control

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and delay type. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD11XA is required but not included (See Industrial Relays & Bases Flyer) 

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and timing function. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD8XA is required but not included (See Industrial Relays & Bases Flyer) 

Carlo Gavazzi Multifunction Timer DMB51CM24, Operates on 24VDC and 24 to 240VAC, Mini-D Compact Housing, Snaps Directly to DIN Rail. 5Amp SPDT contact Output, Timing Ranges from 0.1 second to 100 hours. Split into 7 Sub-ranges.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, Class 2 Output, High efficiency, LED indicator for DC power ON, Power Ok output, CE, TUV approved and cULus Listed.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, Class 2 Output, High efficiency, LED indicator for DC power ON, Power Ok output, CE, TUV approved and cULus Listed.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, High efficiency, LED indicator for DC power ON, LED indication for DC low, Power Ok output, Internal input filter, CE, TUV approved and cULus Listed.

Installation on DIN Rail 7.5 or 15mm. Short circuit protection. PFC standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel versions standard. Compact dimensions. UL, cUL listed and TUV/CE approved. Class I Div 2 Groups A, B, C, D approved

Universal AC input full range. Installation on DIN rail 7.5 or 15mm. Short circuit protection. PFC as standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel connection feature. Compact dimensions. UL, cUL listed and TUV/CE approved

Universal AC single phase input full range. Can also be used as bi-phase 400VAC. Installation on DIN rail 7.5 or 15mm. PFC as standard. High efficiency up to 90%. Power ready output. Parallel connection feature. Compact dimensions. CE, TÜV, CCC approved and cULus listed. Class I Div 2 Groups A, B, C, D approved.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, High efficiency, LED indicator for DC power ON, LED indication for DC low, Power Ok output, Internal input filter, CE, TUV approved and cULus Listed.

The RSLM is a very slim electromechanical relay that can switch resistive loads with a maximum switching current of 6A 250VAC/30VDC. It is 1 changeover contact (SPDT) with 1 NO and 1 NC Switch. Control Coil 24VAC/DC, DIN Rail Socket for Slim Relay Included.

14 Pin Socket Mounting, 4 Change Over Conntact (DPDT- 4 form C), 10Amp Contact Rating, 24Volt AC Coil, with LED Indication.  (Socket for RPYA004 Relays is ZPY14A,  need to be purchased separately. )

8 Pin Socket Mounting, 2 Change Over Conntact (DPDT- 2 form C), 10Amp Contact Rating, 12Volt DC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

8 Pin Socket Mounting, 1 Change Over Conntact (DPDT- 1form C), 16Amp Contact Rating, 120V AC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

8 Pin Socket Mounting, 1 Change Over Conntact (DPDT- 1form C), 16Amp Contact Rating, 24V AC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

8 Pin Socket Mounting, 1 Change Over Conntact (DPDT- 1form C), 16Amp Contact Rating, 24V DC Coil, with LED Indication.  (Socket for RPYA001 Relays is ZPY08A,  need to be purchased separately. )

SZPY35M, Hold-Down Spring Steel Clip for ZPY08A, ZPY11A, ZPY14A Base. 

For each Realy / Socket are required at least 2 springs. Up to 4 springs can be mounted.

14 Pin DIN Rail Socket for RPY EM Relays. Hold-Down Spring Steel Clip (SZPY35M) is Optional Accessory need to be ordered separately if required.

11 Pin DIN Rail Socket for RPY EM Relays. Hold-Down Spring Steel Clip (SZPY35M) is Optional Accessory need to be ordered separately if required.