Automation and Control

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and delay type. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD11XA is required but not included (See Industrial Relays & Bases Flyer) 

Timing ranges: 0.5 seconds to 300 hours. 12 to 240 VAC/DC supply voltage. Knob selection of timing range and timing function. 8 Amp DPDT contact output. 48 x 48mm housing for front panel or socket mounting. LED indication for replay status and power supply “ON”.

Socket ZPD8XA is required but not included (See Industrial Relays & Bases Flyer) 

Carlo Gavazzi Multifunction Timer DMB51CM24, Operates on 24VDC and 24 to 240VAC, Mini-D Compact Housing, Snaps Directly to DIN Rail. 5Amp SPDT contact Output, Timing Ranges from 0.1 second to 100 hours. Split into 7 Sub-ranges.

Universal AC single phase input full range. Can also be used as bi-phase 400VAC. Installation on DIN rail 7.5 or 15mm. PFC as standard. High efficiency up to 90%. Power ready output. Parallel connection feature. Compact dimensions. CE, TÜV, CCC approved and cULus listed. Class I Div 2 Groups A, B, C, D approved.

Universal AC input full range. Installation on DIN rail 7.5 or 15mm. Short circuit protection. PFC as standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel connection feature. Compact dimensions. UL, cUL listed and TUV/CE approved

Installation on DIN Rail 7.5 or 15mm. Short circuit protection. PFC standard. High efficiency. Power ready output. LED indicator for DC power ON. LED indicator for DC low. Parallel versions standard. Compact dimensions. UL, cUL listed and TUV/CE approved. Class I Div 2 Groups A, B, C, D approved

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, Class 2 Output, High efficiency, LED indicator for DC power ON, Power Ok output, CE, TUV approved and cULus Listed.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, Class 2 Output, High efficiency, LED indicator for DC power ON, Power Ok output, CE, TUV approved and cULus Listed.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, High efficiency, LED indicator for DC power ON, LED indication for DC low, Power Ok output, Internal input filter, CE, TUV approved and cULus Listed.

Universal AC input full range, Installation on DIN rail 7.5 or 15mm, Short circuit protection, Overload protection, High efficiency, LED indicator for DC power ON, LED indication for DC low, Power Ok output, Internal input filter, CE, TUV approved and cULus Listed.

The RSLM is a very slim electromechanical relay that can switch resistive loads with a maximum switching current of 6A 250VAC/30VDC. It is 1 changeover contact (SPDT) with 1 NO and 1 NC Switch. Control Coil 24VAC/DC, DIN Rail Socket for Slim Relay Included.

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 12V DC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RCP Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RCI00212VDC, RCI002D12V

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 24Volt AC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA210 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM002A24V

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 115/120Volt AC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA210 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM002A120V

8 Pin Socket Mounting, 2 Change Over Conntacts (DPDT {2-form C}), 10Amp Contact Rating, 230Volt AC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA210 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM002A240V

DIN Socket for RRM002 relay without hold down spring, Replacing old Carlo Gavazzi model ZMI2NA-M. 

DIN Socket for RRM004 relay without hold down spring, Replacing old Carlo Gavazzi model ZMI4NA-M. 

14 Pin Socket Mounting, 4 Change Over Conntacts (4PDT {4-form C}), 5Amp Contact Rating, 12Volt DC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA45 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM004D12V

14 Pin Socket Mounting, 4 Change Over Conntacts (4PDT {4-form C}), 5Amp Contact Rating, 24Volt DC Coil, Standard with LED, Push with Arm and Flag Indication.

Carlo Gavazzi RMIA45 Series Industrial Relays are fading out of the market, the new substitue model number is RCI Series, all specs are sames, the difference is only the model number, please check below Spec Sheet in PDF format. New Substitue Model: RRM004D24V