Ballast / Transformer

Philips Advance IMH39GBLSM - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

* This is a discontinued model and is sold while quantity last only. 

Philips Advance IMH39GLFM - Electronic Ballast For 39W Metal Halide Lamps With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

Philips Advance IMH70ELFM - Electronic Ballast For 70W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - Leads Exit Either End - 120-277V - ANSI Code C98/M98 - C139/M139 or M143 Minimum Starting Temp -20°C/-4°F

Philips Advance IMH70GLF - Electronic Ballast For 70W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C98/M98 - C139/M139 or M143 Minimum Starting Temp -20°C/-4°F

Philips Advance IMH100DBLSM - Electronic Ballast For 100W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C90/M90 or M140 Minimum Starting Temp -20°C/-4°F

Philips Advance IMH100DLFM - Electronic Ballast For 100W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C90/M90 or M140 Minimum Starting Temp -20°C/-4°F

Philips Advance IMH70DBLSM - Electronic Ballast For 70W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C98/M98 - C139/M139 or M143 Minimum Starting Temp -20°C/-4°F

Philips Advance IMHG20GBLSM - Electronic Ballast For 20W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C156/M156 - Minimum Starting Temp -20°C/-4°F

Philips Advance IMHG20GLFM - Electronic Ballast For 20W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C156/M156 - Minimum Starting Temp -20°C/-4°F

Philips Advance IZTMH210315RLFM - Electronic Ballast For 210/315W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - 200-277V 2-PIN - Dimmable - ANSI Code C183/C182 - Minimum Starting Temp -20°C/-4°F

Philips Advance RMH39KLFM - Electronic Ballast For 39W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - Leads Exit Either End - 120V - ANSI Code C130/M130 or C179/M179 - Minimum Starting Temp -20°C/-4°F

Philips Advance RMH39KLFSM - Electronic Ballast For 39W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - Leads Exit Same End - 120V - ANSI Code C130/M130 or C179/M179 - Minimum Starting Temp -20°C/-4°F

Philips Advance RMH39KBLSM - Electronic Ballast For 39W Metal Halide Lamps - With Top Exit Leads And Mounting Studs - 120V - ANSI Code C130/M130 or C179/M179 - Minimum Starting Temp -20°C/-4°F

ANSI L73/74 - 347-480 Volt - Power Factor 90% - Maxmum Temperature Rating 105°C - Including Dry Film Capacitor and Bracket Kit. This Ballast does not require Ignitor.  For use with 135/180W Lamps.

ANSI L72 - For use with 90 Watt Low Pressure Sodium Lamp. Quand Tap - 347/480 Volt Input, Power Factor 90% - Maximum Temperature Rating 221 Degree F. - Including Dry Film Capcitor and Bracket Kit. This Ballast does not require Iginitor.

ANSI M139 - 120/277/347V - Power Factor 90% - Maxmum Temperature Rating 105°C - For use with 70W Lamps

ANSI M98/143 - 120/277/347V - Power Factor 90% - Maxmum Temperature Rating 105°C - For use with 70W Lamps

ANSI M90/140 - 120/277/347V - Power Factor 90% - Maxmum Temperature Rating 105°C - For use with 100W Lamps

M102/142 - 120/277/347V - Power Factor 90% - Maxmum Temperature Rating 105°C - For use with 150W Lamps