Ballast / Transformer

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Venture Tri-Tap Ballast 120/277/347V for Metal Halide Lamp 175W ANSI#M57, Capacitor 10uF 400V, No Ignitor

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Philips Advance ICW140QLSM - Electronic Metal Halide Ballast - 140 Watt Lamp - Ballast with side exit connector and mounting feet - ANSI Code C189 Minimum Starting Temp -30°C/-22°F

Venture Tri-Tap Ballast 120/277/347V for HPS/LU Lamp 150W ANSI#S55, Capacitor13.5 uf

Venture Quad-Tap Ballast 120/208/240/277V for HPS/LU Lamp 150W ANSI S55

Standard case - electronic low frequency square wave ballast for 150W metal halide lamps with 120V "tap" for 3 or 4-wire self heating thermal protectors (IDTPs). Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 100 W ANSI#M90, Capacitor12.0 uF 330V, No Ignitor

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Ultrasave - 150W - HPS/LU - Tri-Tap - ANSI S55 - 120/277/347V - HPF

IMH-100-BLFM e-Vision Electronic Ballast for 100W Metal Halide Lamps, ANSI C90/M90, M140, C191. 120-277V 50/60Hz. 

Reactor Core & Coil Ballast w/ BVS-004 Ignitor for HPS 100W S54 Lamp – Venture

ANSI L72 - For use with 90 Watt Low Pressure Sodium Lamp. Quand Tap - 120/208/240/277 Volt Input, Power Factor 90% - Maximum Temperature Rating 221 Degree F. - Including Dry Film Capcitor and Bracket Kit. This Ballast does not require Iginitor.

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 175 W ANSI#M137/M152, Capacitor12.5 uF 330V, No Ignitor

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Venture Quad-Tap Ballast 120/208/240/277V for Metal Halide Lamp 175W ANSI#M57/M107, Capacitor 10uF 400V, No Ignitor

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

ANSI L72 - For use with 90 Watt Low Pressure Sodium Lamp. Quand Tap - 347/480 Volt Input, Power Factor 90% - Maximum Temperature Rating 221 Degree F. - Including Dry Film Capcitor and Bracket Kit. This Ballast does not require Iginitor.