Ballast / Transformer

Hammond 176E - Line Transformers  - Autotransformers - Plug-In - Step Up 115-230VAC - 50/60 Hz - 750VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).

Hammond 176F - Line Transformers  - Autotransformers - Plug-In - Step Up 115-230VAC - 50/60 Hz - 1000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).

Hammond 176G - Line Transformers  - Autotransformers - Plug-In - Step Up 115-230VAC - 50/60 Hz - 1500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).

Hammond 175A-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 100VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175B-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 200VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175C-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 300VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175D-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175E-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 750VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175F-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 1000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 175G-NA - Line Transformers - Autotransformers - Plug-In - Step Down 230-115VAC - 50/60 Hz - 1500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Input is circuit breaker protected - Hi-pot tested to 2 KV RMS - Input is a standard 250V North American, 3-wire, grounded plug (can also be used with adaptors for proper grounding)

Hammond 168B - Line Transformers - Hard Wired - Input 115VAC - 50/60 Hz - 200VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168C - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 350VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168D - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168E - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 750VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168F - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 1000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168H - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 1500VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 168J - Line Transformers - Autotransformers - Hard Wired - Input 115VAC - 50/60 Hz - 2000VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Output taps @ 85, 95, 105, 110, 115 and 125VAC - Ideal for manual line voltage adjustment for electronic equipment or small appliance operation

Hammond 170 - Line Transformers - Autotransformers - Hard Wired - Step Down 230-115VAC Or Step Up 115-230VAC - 50/60 Hz - 50VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Connection by flexible leads, 8" minimum length

Hammond 170A - Line Transformers - Autotransformers - Hard Wired - Step Down 230-115VAC Or Step Up 115-230VAC - 50/60 Hz - 100VA - Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required - Connection by flexible leads, 8" minimum length