Ballast / Transformer

For 2/1xF32T8, 2/1xF32T8ES-30W, 2/1xF28T8, 2/1xF32T8ES-25W, 2/1xF25T8, 2/1xF25T8ES-22W, 2/1xF17T8, 2/1xF15T8, 1xF40T8, equivalent u-bend Fluorescent Lamps. Parallel Instant Start - 347V- Ballast Factor 0.87- Power Factor >0.95- Min. Temp. Rating -22 Deg. F / -30C

For (1) or (2) x F17T8, F25T8, F32T8, F32T8/ES (25W), F32T8/ES (28W), F32T8/ES (30W), (1) x F40T8 Fluorescent Lamps. 347V Input, Parallel Lamp Connection, Instant Start Electronic Ballast. 

For 2/1xF32T8, 2/1xF32T8ES-30W, 2/1xF28T8, 2/1xF32T8ES-25W, 2/1xF25T8, 2/1xF25T8ES-22W, 2/1xF17T8, 2/1xF15T8, 1xF40T8, equivalent u-bend Fluorescent Lamps. Triad Parallel Instant Start - 347V- Ballast Factor 0.88 - Power Factor >0.95- Min. Temp. Rating 0 Deg. F

For 1x F14T5, F21T5, F28T5, F28T5/ES (25W), F35T5, 2 x F14T5, F21T5, F28T5, F28T5/ES (25W). Centium Electronic Programmed Start T5 Fluorescent Ballasts ,347V , 50/60 HZ, Series Lamp Connection.

Triad C2642/347ME - Programmed Rapid Start - 347V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F (-18oC) - For (1/2) CFL 26W CFLs, Multi Exit Means Side Lead Wiring and Bottom Lead Wiring both Available

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

Sola E-724-J-242 Electronic Ballast

Everline D10CC55347TW-K/KS, Output Voltage 19V - 53V, Output Current 11mA - 1050mA, Max Output Power 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, 347Vac, Wire Trap / Plug‐in Connectors for 18 AWG Solid Wire, Constant Current LED Driver. 

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Everline D15CC55347TZ-C, Output 13V - 37V, 15mA - 1500mA, Max Output Power 55Watt, 0 to 10 vDC Voltage Control with Tuning Interface, Class 2 Output, Universal input voltage 347 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.