Ballast / Transformer

Hammond 1615 - Audio Transformers - Push-Pull - HI-FI - Tube Output - 15 Watts - Impedance : 5,000 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 100 ma.

Hammond 1620 - Audio Transformers - Push-Pull - HI-FI - Tube Output - 20 Watts - Impedance : 6,600 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 158 ma.

Hammond 1615A - Audio Transformers - Push-Pull - HI-FI - Tube Output Easy Wire Secondary - 15 Watts - Impedance : 5,000 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 100 ma.

Hammond 1650E - Audio Transformers - Push-Pull - HI-FI - Tube Output Easy Wire Secondary - 15 Watts - Impedance : 8,000 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 100 ma.

Hammond 1620A - Audio Transformers - Push-Pull - HI-FI - Tube Output Easy Wire Secondary - 20 Watts - Impedance : 6,600 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 158 ma.

Hammond 1616 - Audio Transformers - Push-Pull - HI-FI - Tube Output Easy Wire Secondary - 15 Watts - Impedance : 7,600 ct Ohms Primary / 16 Ohms Secondary - Maximum DC Per Side : 100 ma.

Hammond 1750EP - Audio Transformers - Tube Guitar Amplifier - Output Transformers - REPLACEMENT & UPGRADES - 15Watts - Paper Winding - Primary 8,500 C.T. Ohms - Secondary 8 Ohms - Push-Pull Amplifier Type

Hammond 1750AB - Audio Transformers - Tube Guitar Amplifier - Output Transformers - REPLACEMENT & UPGRADES - 12Watts - Bobbin Winding - Primary 9000 Ohms - Secondary 8 Ohms - Push-Pull Amplifier Type

Hammond 1751A - Audio Transformers - Tube Guitar Amplifier - Output Transformers - REPLACEMENT & UPGRADES - 15Watts - Bobbin Winding - Primary 8,000 C.T. Ohms - Secondary 5.3, 8, 16 Ohms - Push-Pull Amplifier Type

Hammond 169PS - Line Transformers - Straight Isolation - Hard Wired - Primary 115VAC - 60 Hz - 15VA - Secondary 115VAC - Electrostatic shield between primary & secondary - Connection by flexible leads, 8" minimum length - Perfect for circuit isolation or "Classic" bias power supply

Universal Lighting Part No. 188611 M2012/27CK-5EU-JT3 for one (1) 20W M156/C156 - Electronic MH Ballast - 120-277 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued and we will dispatch the Hatch brand MC20-1J0UNNU instead. Please refer to the attached specification sheet for the replacement we suggested 

20W - Electronic Metal Halide Ballast - Operates M/C156 Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

M2012CK-7EUN-F for 1 x 20W Metal Halide Lamp - Electronic Metal Halide Ballast - Operates M156/C156 Lamps - 120vac , ±10%, 50/60Hz - Power Factor: >95% - Ballast Factor: 1.00

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

ANSI L69 - 120/277 Volt - Power Factor 90% - Maxmum Temperature Rating 221 Degree F. - Including Dry Film Capacitor and Bracket Kit. This Ballast does not require Ignitor.  For use with 18 Watt (SOX18) Lamps.

Philips Advance IMHG20GBLSM - Electronic Ballast For 20W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C156/M156 - Minimum Starting Temp -20°C/-4°F

Philips Advance IMHG20GLFM - Electronic Ballast For 20W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C156/M156 - Minimum Starting Temp -20°C/-4°F

Philips Bodine B50 Cold-Pak - Emergency Ballast - 90 Min.  Cold Environment Applications -20°C to 55°C Temperature Rating One- or Two-lamp Operation - 120-277 VAC - 60Hz - Up to 1200 Lumens @ 25°C - Single Pole Test Switch

Fulham Pony Electronic Ballast SC-120-113-CFL for 1 x 13w Quad 4-Pin Tube or 13w Triple Tube or F15T8 or F17T8 120V