Ballast / Transformer

Universal Lighting M7012-27CK-5EU - 70 Watt - VS Electronic MH Ballast - No Feet - Side Lead Exit - Input Voltage 120-277V

Universal Lighting M15012-27CK-5EU-F, For 1 x 150W Metal Halide Lamp - Electronic Metal Halide Ballast - Operates M/C102/E, M/C142/E Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

IMH-100-BLFM e-Vision Electronic Ballast for 100W Metal Halide Lamps, ANSI C90/M90, M140, C191. 120-277V 50/60Hz. 

Philips Advance IMH70DBLSM - Electronic Ballast For 70W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C98/M98 - C139/M139 or M143 Minimum Starting Temp -20°C/-4°F

Universal Lighting Part No. 188629 - M3912/27CK-5EU-JT3 - 1 Lamp - 35W/39 Watt - 120-277 Volt - Electronic Metal Halide Ballast, ANSI Code M130/C130

* Product discontinued. Suggested replacement Philips Advance RMH39KBLSM

https://www.bulbspro.com/rmh39kblsm.html

Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

Philips Advance IMH39GLFM - Electronic Ballast For 39W Metal Halide Lamps With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

IMH-50-GLFM e-Vision Electronic Ballast for 39W or 50W Metal Halide Lamps, ANSI M130, M110, M148, 120-277V 50/60Hz. Smaller Metal Case, Side Exit Leads with Mounting Feet

Universal Lighting Part No. 188611 M2012/27CK-5EU-JT3 for one (1) 20W M156/C156 - Electronic MH Ballast - 120-277 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued and we will dispatch the Hatch brand MC20-1J0UNNU instead. Please refer to the attached specification sheet for the replacement we suggested 

Philips Advance IMH39ABLSID - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code M130 Minimum Starting Temp -20°C/-5°F.

* Ballast will not Operate if Insulation Detector is Absent or Shorted.

Philips Advance IMH100DBLSM - Electronic Ballast For 100W Metal Halide Lamps - With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C90/M90 or M140 Minimum Starting Temp -20°C/-4°F

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

VS Electronic MH Ballast M7012-27CK-5EU-J - for one (1) 70 Watt, M139 or M143 or M98 Cearamic Metal Halide or Compatible Equivalent Lamp. Input 120-277V. 

39W - Electronic Metal Halide Ballast - Operates M/C130 Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/rmh39kblsm.html

Lutron EHDT832MU110 - 120-277V - Ecosystem Control - H-Series Ballast Able To Control One T8 32W Bulb

For (1) x F17T8, F25T8, F32T8 Fluorescent Lamps, Programmed Start Electronic Ballast, 120-277V Input Voltage, Philips Advance Mark 7 0-10V Low Voltage Dimming. 

Lutron EC5T832JUNV1 - 120-277V - 3-Wire/Ecosystem Ballast Able To Control One T8 32W Bulb

* Please note the lead time for this item is around 8-10 weeks (if no further delay)