Ballast / Transformer

For (1) x F17T8, F25T8, F32T8 Fluorescent Lamps, Programmed Start Electronic Ballast, 120-277V Input Voltage, Philips Advance Mark 7 0-10V Low Voltage Dimming. 

Lutron H3DT832CU110 - 120-277V - 3-wire/Ecosystem Controlled - Hi-Lume 3D Ballast Able To Control One T8 32W Bulb

Lutron H3DT840CU110 - 120-277V - 3-wire/Ecosystem Controlled - Hi-Lume 3D Ballast Able To Control One T8 40W Bulb

Lutron H3DT832GU110 - 120-277V - 3-wire/Ecosystem Controlled - Hi-Lume 3D Ballast Able To Control One T8 32W Bulb

For (1) x F17T8, F25T8, F32T8 Fluorescent Lamp. Advance Mark 10 PowerLine Electronic Dimming, Programmed Start, 120V 60Hz Input,

Lutron H3DT832CU117 - 120-277V - 3-wire/Ecosystem Controlled - Hi-Lume 3D Ballast Able To Control One T8 32W Bulb

Lutron EHDT832MU110 - 120-277V - Ecosystem Control - H-Series Ballast Able To Control One T8 32W Bulb

Lutron H3DT832GU117 - 120-277V - 3-wire/Ecosystem Controlled - Hi-Lume 3D Ballast Able To Control One T8 32W Bulb

ULTRASAVE Lamp Type FT 40W - Series Lamp Connection-  50/60 Hz Input Frequency - 18 ft Maximum Remote Mounting - Sound Rating A - 70°C Max. Case Temperature

Fulham Pony NPY-120-126-CFL - (1) Lamp - 120 Volt - Rapid Start - 1.0 Ballast Factor - Maximum Power 32 Watts

Fulham Pony NPY-120-132-CFL - (1) Lamp - 120 Volt - Rapid Start - 0.95 Ballast Factor - Maximum Power 34 Watts

S76 35W HX-HPF 120/208/240/277 Core & Coil Ballast - For One 35 Watt  S76 High Pressure Sodium Lamp

Philips Advance RMH39KBLSM - Electronic Ballast For 39W Metal Halide Lamps - With Top Exit Leads And Mounting Studs - 120V - ANSI Code C130/M130 or C179/M179 - Minimum Starting Temp -20°C/-4°F

HID Ballast - High Pressure Sodium F-Can - 35W S76 Lamp Wattage - HX-HPF - 120/347V

39W - Electronic Metal Halide Ballast - Operates M/C130 Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/rmh39kblsm.html

S76 35W R-NPF 120 Core & Coil Ballast - For One 35 Watt  S76 High Pressure Sodium Lamp

Philips Advance RMH39KLFM - Electronic Ballast For 39W Metal Halide Lamps - With Side Exit Leads And Mounting Feet - Leads Exit Either End - 120V - ANSI Code C130/M130 or C179/M179 - Minimum Starting Temp -20°C/-4°F

Philips Advance IMH39ABLSID - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code M130 Minimum Starting Temp -20°C/-5°F.

* Ballast will not Operate if Insulation Detector is Absent or Shorted.

M130 35/39W CWA 120/208/240/277 Core & Coil Ballast - For One 35 Watt Metal Halide Lamp