Ballast / Transformer

Philips Advance Centium Series Electronic Fluorescent Ballast – Programmed Start - 347-480V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating -20 Deg. F / -29 Degree C - For (1-4) F54T5HO and F54T5HO/ES/49W, FT50W, FT36W, F51T5HO Energy Saver

Signpro Electronic Instant Start Ballasts. For (4) x F24T12/HO, F48T12/HO, F72T8/HO, F96T12/HO. 120-277V,50/60 HZ. Parallel Lamp Connection.

Universal - M250TRIAC3M500C - 250 W - 120/277/347V - Metal Halide - M58 - High Intensity Discharge (HID) Ballasts

Philips Advance 71A82A1001D - High Pressure Sodium - C & C Ballasts - 250W - S50 ANSI Code - 120/277/347V -  90% Power Fact - CWA Circuit Type - 2 Feet Ballast to Lamp Distance - 105°C Temp Rating

Philips Advance 72C5782NP001 - Metal Halide - F-Can Ballasts - 250W - M58 ANSI Code - 120/277V -  90% Power Fact - The Capacitor Is Included As Part Of The Potted Assembly - This Ballast Does Not Require The Use Of An Ignitor

Universal - 1110566CTC000C - 250 W - 120/347V - Metal Halide - M58 - High Intensity Discharge (HID) Ballasts

Philips Advance 72C5783NP - Metal Halide - F-Can Ballasts - 250W - M138/153 ANSI Code - 120/277V - 50 Feet Ballast to Lamp Distance - 90°C Temp Rating -  90% Power Fact - The Capacitor & Ignitor Are Included As Part Of The Potted Assembly

Stepdown transformers and autotransformers are used when you need to connect a lower voltage device to a higher voltage source. This step-down transformer can be used with Xitanium Intellivolt LED Drivers.

Suitable for IP66 rated applications. Connect the Red/White leads to the Supply and the Black/White leads to the Load per the Autotransformer Drawing. The White lead is the Neutral, and is common to both the input Supply and Output to Load.

Stepdown transformers and autotransformers are used when you need to connect a lower voltage device to a higher voltage source. This step-down transformer can be used with Xitanium Intellivolt LED Drivers.

Suitable for IP66 rated applications. Connect the Red/White leads to the Supply and the Black/White leads to the Load per the Autotransformer Drawing. The White lead is the Neutral, and is common to both the input Supply and Output to Load.

ED Etlin-Daniels WH-2301S I/P:AC 120V-60Hz 1.9A O/P:AC 12V 35-230W, Auto Stop Protected & Dimmable, Electronic Transformer for 12V Halogen Lamps Use Only

* This item has been discontinued and is sold upon quantity lasted by Etlin Daniels.

Hammond 169WS - Line Transformers - Straight Isolation - Hard Wired - Primary 115VAC - 60 Hz - 250VA - Secondary 115VAC - Electrostatic shield between primary & secondary - Connection by flexible leads, 8" minimum length - Perfect for circuit isolation or "Classic" bias power supply

Hammond 1650W - Audio Transformers - Push-Pull - HI-FI - Tube Output - 280 Watts - Impedance : 1,900 ct Ohms Primary / 4-8-16 Ohms Secondary - Maximum DC Per Side : 806 ma.