Constant Current LED Driver (>=100W)

Max. Output Power: 150 W, Input Voltage: 120 ~ 277 V, Output Current: 700 mA, Output Voltage: 60 ~ 210 V, Min. Power Factor: 0.9, IP rating: IP66, Isolation: Class 1, Non-Dimmable

Replace by Philips Advance LED Driver as Below Link

https://www.bulbspro.com/ledinta0700c210do.html

120-277V AC Input Voltage - Short Circuit & Overload Protection - 50 / 60Hz Input Frequency - Constant Current Output Mode - 194°F / 90°C Max. Case Temperature - 150W - 3/2/1A - 30-50V DC

BY-PSE-3 Power Supply Enclosure provided by Beyong LED Inc. For Dry and Damp Locations, cRUus listed. Good for Ballast and LED Driver installation. 15" (L) x 3-7/8"(W) x 2-1/16"(H).

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver. Enclosure Case Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

https://www.bulbspro.com/ledinta0700c210do.html

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/xh150c070v210fnf1m.html

Output Voltage 60V - 172V, Output Current 21mA - 700mA, Max Output Power 120Watt, Analog 0 to 10 Vdc Dimming with Tunable Output, Thermal Foldback Protection, 12V Power Source for Active Cooling Device, Universal Input Voltage 120 - 277 Vac, Constant Current LED Driver. Enclosure Case J-Box Stud Mount

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 60V - 172V, Output Current 21mA - 700mA, Max Output Power 120Watt, Analog 0 to 10 Vdc Dimming with Tunable Output, Thermal Foldback Protection, 12V Power Source for Active Cooling Device, Universal Input Voltage 120 - 277 Vac, Constant Current LED Driver. Enclosure Case without Mounting Feet

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 60V - 172V, Output Current 21mA - 700mA, Max Output Power 120Watt, Analog 0 to 10 Vdc Dimming with Tunable Output, Thermal Foldback Protection, 12V Power Source for Active Cooling Device, Universal Input Voltage 120 - 277 Vac, Constant Current LED Driver. Enclosure Case with Mounting Feet

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 99V - 285V, Output Current 53 - 530mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120 - 277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 99V - 285V, Output Current 53ma - 530mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 38V - 107V, Output Current 140mA - 1400mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Tuning Interface, Universal Input Voltage 120-277Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 38V - 107V, Output Current 140mA - 1400mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Tuning Interface, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 50V - 143V, Output Current 105mA - 1050mA, Max Output Power 150Watt, Analog 0 to 10 vDC Voltage Dimming to 10% with Tuning Interface, High Input Voltage120 - 277Vac, Constant Current LED Driver, Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 50V - 143V, Output Current 105mA - 1050mA, Max Output Power 150Watt, Analog 0 to 10 vDC Voltage Dimming to 10% with Tuning Interface, High Input Voltage120 - 277Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Max. Output Power: 150W, Input Voltage: 120-277V, Output Current: 530mA, Output Voltage: 120-280V, Min. Power Factor: 0.9, IP rating: IP66, Isolation: Class 1, Dimming Method: 0-10 V, Dimming Range (%): 100% ~ 10%

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, Universal Input Voltage 120-277 Vac, Constant Current LED Driver

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/d700c150uvt-f.html

Universal Lighting D530C150UVT-F012C - 530mA LED Driver Tuning - Output Power 150W - 0-10V Dimming to 10% - Thermal Foldback Control - Universal Input Voltage 120-277Vac

AFlex Series - Electronic Constant Current - 0-10V Programmable Dimmable LED Driver - 540W Max Output Power - Input 120-277VAC - Output 3-57VDC - 100-1400mA Output Current (Customized) - Compact, Side Feed Case Style - Linear or Log. Dimming Curve - 9-Channel Surface / Recessed Junction Boxes - White / Black

We provide 100-1400 mA, Linear or Log. customized services