Constant Current LED Driver (<50W)

D10CC42UNVA‐A 1050mA Constant Current Output Dimmable LED Driver, Class 2, Combined Step-Dimming & 0-10V Dimming Control, Side Lead Exit

1050mA LED Driver, Analog 0 to 10 vDC Voltage Control, Side Lead Exit, 120-277 Vac Input, Class 2 Output

1050mA LED Driver, Analog 0 to 10 vDC Voltage Control, Bottom Lead Exit, Mounting Length 2.0" by #8/32 Studs

EVERLINE® low-wattage drivers are designed with form factor and control options to meet your linear, track, and downlight needs.

Max. Output Power: 48W, Input Voltage: 120-277V, Output Current: 2.0A, Output Voltage: 24V, Min Power Factor : 0.9, Outdoor Dimming LED Driver,  Envir.Protection Rating: UL damp & dry

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/ledinta0024v41dlom.html

Max. Output Power: 39W, Input Voltage: 120-277V, Output Current: 0.2–0.7A, Output Voltage: 56V, Min Power Factor  >0.9, Point Dimmable LED Driver,  Envir.Protection Rating: UL damp & dry

Max. Output Power: 36W, Input Voltage: 120-277V, Output Current: 10.1 –1.0A, Output Voltage: 48V, Power Factor @ Max  Load: >0.95, Downlight LED Driver,  Envir.Protection Rating: UL damp & dry

10 Watt LED Emergency Driver; 120-277 Volt

The ILB CP10 A from IOTA® is a UL Listed LED emergency driver that enables LED fixtures to deliver 90 minutes of emergency illumination during a loss of normal power. The ILB CP10 A is compatible with most Class 2 LED (10-60VDC) fixture designs and will automatically sense the required forward voltage needed to operate the LED in the emergency mode. The ILB CP10 A features dual flexible conduit for running wires to the normal AC driver and to the single-piece test switch/charge indicator accessory.

In the event of a power failure, the ILB CP05 switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single can and is available in different mounting configurations for individual fixture requirements. The ILB CP05 will operate an LED array load at 5 watts with constant power at a rated output voltage of 10V-60V.

In the event of a power failure, the ILB CP05 HE switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single enclosure and is available in different mounting configurations for individual fixture requirements. The ILB CP05 HE will operate an LED array load at 5 watts with constant power at a rated output voltage of 10V-60V. The ILB CP05 HE features high-efficiency performance and is certified in the CA Title 20 Appliance Efficiency Database.

Advance LED Electronic Driver, Input 120-277Vac, 50/60Hz, Output 40W, 0.1-1.1, 10-54Vdc, Class 2 0-10Vdc Dimming, SimpleSet, Power Factor>=0.9. Minimum Dimming 1%.

Satco S8000 - LED Emergency Driver - 5W - 120-277V - Red - 24 Hour Recharge Time - 1.8 Watt Standby Power - > 90 Minute Operation From Lithium Ion Battery - Switching Time < 1 Sec - Over-Charge / Discharge Protection - Self-Checking Function - Test Button

Philips Advance Xitanium LED Driver, XI020C070V030RNP2, Maximum Output 20W 0.4-0.7A, 15-30Vdc, Input 120-277Vac, LE+TE Dimmable, 400mA to 700mA via DIP switches (refer to figure & notes in the Electrical Specification section)