High Intensity Discharge (HID) Ballasts

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 875 W ANSI M166

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 1000 W ANSI M141

IMH-100-BLFM e-Vision Electronic Ballast for 100W Metal Halide Lamps, ANSI C90/M90, M140, C191. 120-277V 50/60Hz. 

IMH-50-ALFM e-Vision Electronic Ballast for 39W or 50W Metal Halide Lamps, ANSI M130, M110, M148, 120-277V 50/60Hz. 

IMH-50-GBLS e-Vision Electronic Ballast for 39W or 50W Metal Halide Lamps, ANSI M130, M110, M148, 120-277V 50/60Hz. Smaller Metal Case, Bottom Leads with Studs

IMH-50-GLFM e-Vision Electronic Ballast for 39W or 50W Metal Halide Lamps, ANSI M130, M110, M148, 120-277V 50/60Hz. Smaller Metal Case, Side Exit Leads with Mounting Feet

Venture Quad-Tap Ballast 120/208/240/277V for Pulse Start Metal Halide Lamp 70W ANSI M98

Venture Tri-Tap Ballast 120/277/347V for Pulse Start Metal Halide Lamp 70W ANSI M110

Venture Dual-Tap Ballast 347/600V for HPS/LU Lamp 400W ANSI S51

Standard case - electronic low frequency square wave ballast for 150W metal halide lamps with 120V "tap" for 3 or 4-wire self heating thermal protectors (IDTPs). Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

Advance ICW140MLSM : Electronic Metal Halide Ballast 140W CPO-TW 208-277V 50/60HZ, Xtreme Electronic Ballast for Philips CosmoPolis Lamps.

Philips Advance 73B5790-500D - 250 Watt  M58 Metal Halide or H37 Mercury Lamp - 120/208/240/277 Volt Encapsulated Ballast w/ 15MFD 400VAC Capacitor

Philips Advance 71A8056500D - 100 Watt S54 - 120/240 Volt  - 35MFD 240V Capacitor - LI551J4 Ignitor

ANSI L69 - 120/277 Volt - Power Factor 90% - Maxmum Temperature Rating 221 Degree F. - Including Dry Film Capacitor and Bracket Kit. This Ballast does not require Ignitor.  For use with 18 Watt (SOX18) Lamps.

ANSI L71 - 120/208/240277 Volt - Power Factor 90% - Maxmum Temperature Rating 221 Degree F. - Including Dry Film Capacitor and Bracket Kit. This Ballast does not require Ignitor.  For use with 55 Watt (SOX55) Lamps.

ANSI L72 - For use with 90 Watt Low Pressure Sodium Lamp. Quand Tap - 120/208/240/277 Volt Input, Power Factor 90% - Maximum Temperature Rating 221 Degree F. - Including Dry Film Capcitor and Bracket Kit. This Ballast does not require Iginitor.

Plusrite Quad Tap Ballast 120/208/240/277V for HPS 1000W ANSI#S52, Capacitor 26uF 525V, Ignitor GM303. Compatible with Any ANSI S52 1000W High Pressure Sodium Lamp

Philips Advance e-Vision 70W - Electronic Metal Halide Ballast - Operates M/C98, M/C139,M/C143 Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

Venture Tri-Tap Ballast 120/277/347V for HPS/LU 100W S54 Lamp – Venture